Logo
FULL SITE MENU

Search results

  1. M

    Throttle slop in side-mount remote control box for honda bf15

    I have a Honda BF15 remote kicker (no twist-grip tiller handle) . It was professionally installed with a side-mount oOnda control box After shifting into forward gear, I have to advance the throttle handle more then half of its total travel length to get any throttle reaction out of the...
  2. M

    Bf150 oil leak at tilt

    I noticed oil on my hydraulic steering arm today. Not a huge amount but enough to send an instant chill down my spine---I keep the inside of the cowling (bottom outside lip of the oil pan around the rim of the cowling) clean as a whistle so if there's ever a crankcase leak I'll see it. So I...
  3. M

    Flushing after salt water use

    hey Guys-- I have a BF150 and a BF9.9. Always stored the boat in a driveway and ALWAYS flushed in either a freshwater lake or off clamshells after saltwater use. I recently got a home with a dock and the boat is ALWAYS in saltwater now and it is a PITA to flush with freshwater after saltwater...
  4. M

    Gearcase lube--johnson/evinrue gear oil for a honda bf150 + honda 9.9

    hey Guys I have a gallon of HPF XR gear oil (Johnson/Evinrude, manufactured in 2011 for E-tec outboards) that I'd like to use in my Honda I never mix and match crankcase oil but how about gear lube----any danger or concerns using Johnson/Evinrude HPF XR in a Honda 4-stroke? thanks!
  5. M

    PARTS QUESTION: Honda 9.9 HP (BFP10DXKHT) Oil drain washer?

    I just spent way more time on Boats.net then I'd admit to in polite company trying to search the part number for an oil drain plug gasket (crush washer) for a 2010 BF9.9. I shot blanks---nada! Can anyone help me? This is the crankcase oil plug gasket, not the gear oil plug gasket thanks...
  6. M

    Honda bf150---help! Lost all instruments (tach/hour meter/voltmeter/tilt indicator

    good afternoon Gents I just put 100 hours on a BF150 up the central Coast of British Columbia (flawless performance) However, throughout this trip I had zero engine instruments for the run time. No tach, no voltmeter, no tilt indicator, no hour meter) I checked all fuses (according to manual...
  7. M

    BF150 : Critical Parts---What To Carry When in a Remote Location

    hey Guys, I've got some big plan for this summer---I'm trailering the boat up the spine of Vancouver Island, then launching at Port Hardy and going 100 miles north up Queen Charlotte Strait to go fish king salmon nirvana. Definitely a remote location. I have a BF150 with 500 hours and a...
  8. M

    Bf150-- oil level indicated on the dip stick --- is hatch mark the minimum required level?

    Yo, Gents, For some reason, getting the proper amount of oil into my BF150 has become complicated. First time I did a change, I carefully followed the liter requirements indicated by the manual. After running and letting her sit, the oil ended up being well over the top hatch mark! So...
  9. M

    Bf150 won't go in to gear after impeller change-out

    good day, Gents---Changed out the impeller on a 2007 BF150. Motor had 400+ hours of salt water use so it was a bit hard to get the L.U. off and just as hard to get it back on. When getting it back on, it didn't want to seat properly so I applied a bit of force --- I heard a load popping noise...
  10. M

    Honda BF150 is "making oil"---what to look for?

    Changed oil and filter at 400 hrs. Oil registered approx 1/8 " below top hatch mark on dip stick. Also changed out both T-stats and all fuel filters in preparation for a 4 day fishing trip. I was out in open ocean with huge swells so I spent 4 days operating the BF150 at 3,000- 3,700 RPM's...
  11. M

    BF150 Fuel Pump Filter Part No. 16911-759-003

    Afternoon, gents Today I changed out the high and low pressure fuel filters on my BF150 (400 hours) I also wanted to change the in-line fuel pump filter but couldn't find any mention of how to do it in the Honda manual. It looked to me like the manifold cover (??) has to be pulled to get at...
  12. M

    Replacing Thermostats on a Honda BF150

    Good Day, Gents Question; when replacing T-stats (2007 BF150 with 400 hours) should I also consider replacing the SENSOR ASSY., WATER TEMPERATURE (Honda Code 6991889) and the "O" rings for those sensors or can I just replace the T-stats and the "O" ring for the T-stat cover? The motor...
  13. M

    Honda 9.9 plastic tube in oil pan

    I over-filled the oil on an oil change in a 2010 9.9 Honda. I tried pulling some oil back out, using a Jabsco pump and a plastic pick-up tube that I threaded down the dip-stick hole. I pulled out the oil no problem, but when I tried top withdraw the pick-up tube a five inch piece sheared off...
  14. M

    Honda BF150: Changing out the water sep filter and the high pressure filter

    Is it necessary to remove both L + R panels to change out these filters? Maybe just the "L" panel?
  15. M

    2007 Honda BF150 Shift problems

    Shifts into "FWD" and "N" fine. Shifts into "R" fine, but when shifting back into "N", the gears remain in "R" and the throttle seems to advance, (RPM's seem to increase, speeding up the "R" motion) If I bypass "N" and go from "R" straight into "FWD", then back to "N", she shifts into "N" and...
Back
Top