Logo
FULL SITE MENU

Search results

  1. H

    BF250D Spark plugs.

    I seem to have messed up with the spark plugs. Since I ordered some parts , I decided to go for the Iridium ones. Recommended for the 250D is ZFR6K-11E. Instead I got SPARK PLUG (IZFR6F11) (NGK). Will that be a problem?
  2. H

    Obvious Schematic Error.

    Ok so even the Original Shop manual may have errors… I think 18 and 19 valve been changed around…
  3. H

    BF 250D Exhaust manifold Inspection.

    Hi All, BF 250D about 2,1/2 years old not many hours due to Covid Pandemic restrictions. Engine services done properly with OEM parts and lubricants. I have been wanting to make a visual into the the exhaust manifolds just to get an idea on salt buildup or corrosion now that the engine is new...
  4. H

    BF250D trim tilt limit.

    Dear Honda Friends, is there a way to program the newer Honda BF250D to trim up to a specific point and no more? m Many thanks.
  5. H

    NMEA 2000 Relay Kit For Honda BF250D

    Dear Fellow boaters, Honda part 06332-ZZ3-000AH. Brand new Honda with lcd display. The Display for this boat is powered through the nmea 2000 network cable. The network cable has been connected to a toggle switch therefore I purchased the above relay so that when the engine ignition is turned...
  6. H

    Honda Bf130 Thermostat.

    Greetings fellow Honda owners. Bf 130 approx 850 hrs, 1999 model. I have followed the info about cracked heads and blocks. My Honda runs very well 20 years now. I ordered a new thermostat; I believe these engines had 80deg C thermostat and were replaced by 72 deg. thermostat , obviously to run a...
  7. H

    Bf130 Fuel pump trouble.

    1999 Bf130 without Vapour separator/electric pump upgrade about 840 hours. The usual 2 seconds fuel system pressurization cycle sounds mangled. The engine won’t fire up. I am sure it’s the electric pump which is at fault. Can someone please advise me: a)should I try disconnecting and checking...
  8. H

    Bf130 oil pressure light on green

    Dear fellow Honda owners, please help. Since reading the forum, I have come to realize that. The oil pressure light should: Go on for two sec. with the hight temp light together for 2 sec and then should go off. after engine start it should stay on (green) assuming all is well. In my case the...
  9. H

    Bf130 high idle after service...

    Hello to all... I have just serviced my engine. its a Honda bf130 with about 800 hours bought 1999 only salt water use... Changed oil, oil filter,pulled out vapour separator opened the cooler on the back of it and the oil cooler...or what seems to be an oil cooler and removed limescale/salt...
Back
Top