Logo
FULL SITE MENU

Search results

  1. S

    precision blend check valves, older motor replace or keep on going?

    Hi, picked up a boat with 95 150 salt series carbed...been using the past few months but getting around to checking everything in the manual and service manual. Considering it's age, what's the recommendation on these small precision blend check valves? Replace for preventative maintenance or...
  2. S

    95 (or 96) 150 salt series 2stroke, can trim pump be removed without removing the motor?

    I know I can service the seals and with a bit of work you can change the trim motor without removing it But I'm just wondering if i can pull it altogether out without loosening the motor as there's a good bit of cleanup it could use. Thanks! swade
  3. S

    Any tech conventions when marking cylinders during compression testing?

    Bit of detective work here. I have a curiosity that had bugged me about my 99 bf130 since i bought it and the boat used. I *know* this motor is an affected serial number for the block casting. I know zero about the history of the motor. The motor also had white pen markings next to each plug...
  4. S

    1995 150 flush port routing

    Hi all, Been hanging out on the honda board for a few years, but the new project boat has a 95 150 saltwater series. I haven't had a chance to dig into a manual on this thing yet. Motor runs great but I'm trying to find the routing of the flush port, I see it goes into the bottom cowling...
  5. S

    bf130 oil filter can i use 15400-pt7-005

    Hey guys can someone double check me, i got a bunch of spare honda parts awhile back, most was for my motor. There's a couple of new sealed oil filters 15400-pt7-005 will these work on a 130? Having a bit of a time figuring it out but from a google it seems this was superseded by 15400-PLM-A01...
  6. S

    bf130 flush kit, what is this thing made of? any alternatives?

    My salt water had one that was never removed by the previous owner, it was literally welded to that piece it plugs into...i had to angle grind it off and replace that piece on the other side. I couldn't tell what it was brass? copper? it seems like it's a dissemiliar metal. I can't seem to find...
  7. S

    Can you pull the tilt tube, motor without removing the transom mounts?

    Got the 130 back together on the boat and the boat fixed up and its running great, it didn't skip a beat out the gate. thanks hondadude and others for help! Though when i took everything off and repainted,etc everything the tilt tube had some pretty good rust on a section of threads on one end...
  8. S

    bf130 delay after turning key for check engine light & buzzer

    Hi maybe this is something I haven't noticed...though it sure seems different than prior behavior. Haven't had this motor in the water yet, just on hose in the driveway. Before xmas, flu,etc few weeks ago started fine, ran fine. Came back and today and spent a good part of the day thinking...
  9. S

    can bf50 float bowl be removed without removing all of the carbs?

    I have this honda bf50 I was going to use on my pontoon before i sold it for this deckboat with the 130. Don't know anything about it hardly, have only seen it run and it's been sitting about 6 months now i need to sell it since i'm not going to use it. It's flooding out the carbs in the airbox...
  10. S

    bf130 water routing and cooling

    Another question... Is it safe to say: 1) pgmfi lights self check work and no alarms. Both light up on key and beep check works, on start oil stays on (normal green). water goes out. 2) hot water out of the prop 3) pee hole seems ok, still cleaning out the t connectors. That things are...
  11. S

    bf130 starting problem no fuel in vst high side, low side seems ok, both pumps seem ok.

    Hi All, wondering is someone can confirm my suspicions. First, it's been sitting about 4-5 months..mostly because i snapped two water jacket cover bolts and just got around to drilling them out last week (project boat was working on other stuff). Went out this morning, cranked right up on the...
  12. S

    evinrude/suzuki df50

    Hi, is there a good recommended repair manual for this? I have a cylinder getting water and need to pull this one apart. Thanks!
  13. S

    bf130 couple of questions

    Hi! I've got mine off the boat, lower unit pulled, transom bracket apart,etc to clean and repaint everything and have couple of questions The shift shaft water seal, is that replaced from top or bottom? I pulled the cclip and i didn't know what that was under the washer crud or the remains of a...
Back
Top