Logo
FULL SITE MENU

Search results

  1. T

    Lean Mixture Evinrude 25 hp

    "I have an Evinrude 1976 model "I have an Evinrude 1976 model 25602E 25 hp with about 145 psi compression on both cylinders. The top plug looks dry with little oil residue and the bottom plug looks somewhat wetter. What may be the cause for one lean cylinder and one normal cylinder? This motor...
  2. T

    Joe or anyone Linkage and Synchronization Questionon 92 Johnson 150

    " My engine seems to bog down " My engine seems to bog down on accelerating from idle when the carbs. butterflies and timing advance move at exactly the same time. This is what the books say the setting should be, but if I set the timing to advance slightly before the carbs., the bogging seems...
  3. T

    Joe or anyone who knows 92 150 Johnson how to Replace Fittings

    " I have 2 pluged fitting/scre " I have 2 pluged fitting/screens on the port side recirculation system. I have tried to clean them, but cannot get them clear. In fact I poked a hole in one of the screens or plastic material. These fittings are apear to be brass and are shaped in a right angle...
  4. T

    Joe or anyone who may know Please help me with PTT Question

    " I have 92 Johnson 150 VJELAN " I have 92 Johnson 150 VJELANC motor. The trim motor is not working all the time. After checking and replacing relays, wiring etc., I discovered the trim motor needs brushes. My local parts dealer only sells the entire motor. Do you know where I may find some...
  5. T

    H2OPressure

    " Strange things... Last boati " Strange things... Last boating season the water pessure on my 92 Johnson 150 was 6-8 psi at idle and 15-25 psi while running wot. Now I put the boat in the water this season and noticed the pressure at idle was 20 psi and while running it pegs the needle on my...
  6. T

    Help Joe or anyone I am desperate 92 150 Johnson

    " Joe, I have posted several t " Joe, I have posted several times regarding my idle problem. My VJ150ELANC has 110psi compression an all cylinders. I started out fine this year's season until I performed what I thought was preventive maintenance. I changed the plugs, replaced the 10 year old...
  7. T

    Joe please help me ID the year of my Johnson 150

    " What year is my motor? Model " What year is my motor? Model number VJ150ELANC. This does not seem to work with the INTRODUCES scheme. Can anyone help explain this to me? Thanks, Trooper "
  8. T

    Model year for Johnson 150

    " What year is my motor? Model " What year is my motor? Model number VJ150ELANC. This does not seem to work with the INTRODUCES scheme. Can anyone help explain this to me? Thanks, Trooper "
  9. T

    attn Joe or anyone who can help with Idle and acceleration problem 92 Johnson 150

    " I put the boat in the water " I put the boat in the water this weekend, but it would not stay running. When first starting it would idle fine for adout 30 sec and begin to decrease RPM and then spit sneeze once and cut off. Once up and going it ran fine at mid to full RPM but would not idle...
Back
Top