Logo
FULL SITE MENU

Search results

  1. T

    F70 only runs at 3400RPM

    Hi, I have an F70 that will not rev over 3400. This is after changing the VST filter. The HP pump tested good. 70 PSI with the return line pinched. The engine blew a 150 compression in every hole and is banging on all 4 when I pull out plugs for the injectors. YDS has no codes TPS and shift...
  2. T

    3 cyl 90 with erattic timing on #2 CDM

    The engine runs poorly and idles like *****. The #2 cylinder timing is going berserk. ! and 3 are OK. All 3 CDM's have been replaced as well as the trigger. All the grounds have been checked and all the wiring has been checked for weird shorts. There is no rev limiter in the engine. The...
  3. T

    Upgrade an oldl B2 to a B3 duoprop

    Can this be done? Should it be done? The B2 got stuck in forward and needs repairs. The hull is a Sea-Ray 25 weekander. I am thinking the duo-prop is a performance upgrade.
  4. T

    Bravo 3 hose kit install problem

    I got the old one out, but I cannot get the new one in. The plastic pipe seems to be to short to grab the ridge in the grommet. Therefore the grommet will not go in without stuffing up. It should be flush with the installation tool. I am a good 1/4 of an inch away. I cannot understand why after...
  5. T

    Yellow Oil Light stuck on 150 HPDI

    "I ran the oil all the way out "I ran the oil all the way out and the red light came on, but the yellow is still stuck an on the digital gauge. The tanks are full now. And reset procedure?"
  6. T

    Anyone here repowered an FXA b31 Minebs a b69

    Will the crusader just drop in Will the crusader just drop in? The C/C engine is difficult to get parts and expensive. F/W Fwd is a PITA. I have 327Q's.
  7. T

    Hello TB here Just an Intro

    "This is 'bandit. I have "This is 'bandit. I have been on THT for some time. Some may know me. But I am going to drop them. They are to broad. And thier attitude has changed. I specialize in Merc/Force motors with. 12 years in. "
Back
Top