Logo
FULL SITE MENU

Search results

  1. B

    115tldi tohatsu

    "should water be exiting via t "should water be exiting via the exhuast port as well as the water check port? is it normal for it to occasionally smoke out of the exhuast port? on my 115tldi i have only noticed water coming out of the water check port when in the water or flushing outboard...
  2. B

    115 tohatsu tldi flushing outboard

    boat used in saltwater. when boat used in saltwater. when flushing outboard with earmuffs will adding small amount of dawn dishwashing detergent (1/4 cup) to flush out motor potentially harm outboard internally (will degreaser ingredient in dawn be harmful to cooling system?)
  3. B

    115 tldi high flow water intake screens

    "i have 115 tldi tohatsu on a "i have 115 tldi tohatsu on a tunnel flats boat and have been having overheating problems. alarm comes on and water stops comining out of motor. shut down motor, wait a minute, and it starts right up, water coming out good, but it will smoke for about 20 seconds...
  4. B

    Stabil in 115 tldi tohatsu

    "can i use regular sta-bil in "can i use regular sta-bil in a 08'115tldi tohatsu on a regular basis? http://www.sta-bil.com/sta-bil/products.htm"
  5. B

    115 tldi tohatsu breakin

    "i am currently 3 hours into t "i am currently 3 hours into the 10hour break-in. my question is - Can i expect an increase in power/better performance and better fuel usage after this break in period? (example- currently at 3600rpm boat speed is 26mph, after break in at 3600rpm would...
  6. B

    Tohatsu 115tldi flush system

    ""Comes standard with a co ""Comes standard with a convenient built-in freshwater flush system that simplifies routine engine flushing" If motor is used in saltwater only, is this flush system enough to rinse internal parts or do i need to still use motor flusher/engine running? (i want to...
  7. B

    Tohatsu 115hp tldi shaft conversion

    "is it possible to convert a 2 "is it possible to convert a 25" shaft to a 20" shaft? if yes, is this a simple procedure?(i.e. just remove spacer, etc.) if this is done on a new outboard does this affect performance or void warranty?"
Back
Top