Logo
FULL SITE MENU

Search results

  1. hystat

    Omc 800 mechanical lower

    I'm finally getting out of the OMC stuff. Parting out my last boat. Watch my ebay account for more stuff like this: www.ebay.com/itm/131518114402 I'm still gonna hang out here and try to answer questions. I have a lot of selectrim (V6) stuff and tons of OMC bits I'll be clearing out.
  2. hystat

    growly SE116 gen ii

    I put a 116 upper on my Gen II V6 1.8? ratio last fall before storing the boat and noticed a bit of a growl, more pronounced after a longish run. Seems to almost disappear in neutral, noticeable at idle in gear and at slow plane. ran it about 15 hours thinking it might just need breaking in...
  3. hystat

    bad oil pump? that's my guess AQ130C failure analysis

    A few years ago, I traded about $50 worth of OMC parts for an AQ130C engine at a marine outdrive rebuild place. The guy knew nothing about the motor. he had collected the engine with an outdrive. I just recently got around to looking at it (had the starter off my 131's B18 anyhow, so thought...
  4. hystat

    this person needs our help...

    http://ontario.kijiji.ca/c-cars-vehicles-boats-watercraft-powerboats-motorboats-Long-shLong-shaft-boat-motoLong-shaft-boat-motorotor-W0QQAdIdZ269704002 Wanted: Long shLong shaft boat motoLong shaft boat motorotor ong shLonong shLong shaft boat motoLong shaft boat motorotorong shLong shaft...
  5. hystat

    GLM0411 26T Gear? V6 FWD gear maybe?

    In a box of parts I bought on eBay years ago is a new GLM0411 gear. 26T looks like a V6 fwd gear. just want to inventory it.... or toss it... I don't see any reference to 411 in any GLM catalogs. Anyone recognize that number?
  6. hystat

    International Harvester 9.0L marine DV-550 DV-550B

    I have a pair of new exhaust manifolds for one...trying to figure out what years and if anyone besides PCM marinised these
  7. hystat

    Using Dry Joint 2008 4.3 L Manifolds on a "Cold Manifold" system

    I have 2008 4.3 Dry Joint manifolds on my 1985 MR185 (229 V6 Chevrolet) I had to use the old cold manifold style thermostat housing (has to do with alternator mounting) so I a plugged the riser feed port and have just 1 hose to each manifold feeding the bottom. I see my temp gauge climbing...
  8. hystat

    10 years too late invention

    was just thinking how easy it would be to make an outboard bracket that mounts on a stringer intermediate. I'm no designer..haha... just a bad idea guy cast aluminum dowel that bolts in the trunnions (A), then sits in the dowels below the exhaust holes (B), then a couple of transom pads to make...
  9. hystat

    1973 Johnson 25hp acting like prop hub spun...

    but it hasn't spun. I tried several props. It does it the worst with the 12P. almost held on plane with a 10P, but then slipped. If the dogs in the lower were gone, I would expect clunking. But this feels exactly like a spun prop hub. Holds torque until just about to plane then revs up...
  10. hystat

    AQ280 DP drives... who was looking for 2.31?

    someone was posting here a while ago and contacted me regarding these 2.31 ratio 280's please PM me if still looking - thanks
  11. hystat

    Need a tiller for 1990 40HP

    "looking for the complete till "looking for the complete tiller with shifter and cables to convert a 1990 40HP. the BRP conversion kits seem to start about 1995... so 1990 requires all the itsy bitsy pieces to be bought through parts... So, I'm looking for a decent used one - thanks...
  12. hystat

    Duoprop ratios 195 vs 23

    "Does anyone have a listing of "Does anyone have a listing of what packages used the two different DP ratios on the AQ series drives? I picked up a 2.3 ratio DP lower for my AQ180, but now I'm thinking the 1.95 would be more correct for all V8's even though my 180hp V8 is more like a V6 in...
  13. hystat

    Help IDing Duoprop Proset 280 Diesel

    From a280 drive - was behind a From a280 drive - was behind a diesel. The rear prop is 4 blade so I guess that makes it A series. Only legible numbers are M24431 R5795 (4 blade) M18274 R5793 (3 blade) trying to find out what set they are
  14. hystat

    VP Diesel DP Propset ID

    From a280 drive - was behind a From a280 drive - was behind a diesel. The rear prop is 4 blade so I guess that makes it A series. Only legible numbers are M24431 R5795 (4 blade) M18274 R5793 (3 blade) trying to find out what set they are
  15. hystat

    Ebay Selectrim Fail %3cIMG SRC%3d%22httpwwwmarineenginecomdiscuscliparthappygif%22 ALT%3d%22%22 BORDER%3d0%3e

    "from the ad: also attache "from the ad: [i]also attached is the front auto motor mount selectrim fail"">...
  16. hystat

    Teflon coated Alpha shift cable

    I'm assuming that's wh I'm assuming that's what the plasticy looking coating is on the new Mercruiser shift cable I bought. Do I lubricate it at install? Or does it go in dry?
  17. hystat

    Stripped Drain plug fix

    "thought I'd share this fi "thought I'd share this fix- I bought a 25HP 'Rude and the drain plug was stripped and someone had tried to use teflon tape to fix it... no good. so, I simply retapped the hole to the next size I could find which was M10 X 1.5 Metric (coated the tap with grease to...
  18. hystat

    Beware of Boat Cover Seller CS Enterprises

    They have stolen my money and They have stolen my money and somehow convinced Paypal they shipped a cover to me - they didn't and I'm out $191. Beware- do not order anything from them
  19. hystat

    Beware of eBay boat cover seller CS Enterprises

    They have stolen my money and They have stolen my money and somehow convinced Paypal they shipped a cover to me - they didn't and I'm out $191. Beware- do not order anything from them
  20. hystat

    IH 90L V8 Marine engine or D550 International

    "Anyone have one of these in t "Anyone have one of these in their boat? If so, who marinized it? PCM?"
Back
Top