Logo
FULL SITE MENU

Search results

  1. haventaclue

    Serial number again

    I just reread your original post. No spark. I'm assuming it's turning over. Look at the kill switch and circuit, black/yellow stripe wire.
  2. haventaclue

    Serial number again

    That has changed, I bought the manual here many moons ago, though at that time parts were unavailable for sale outside the US. Try these guys, my goto at the minute, https://marineparts.ie/
  3. haventaclue

    Serial number again

    http://download.brunswick-marine.com/download/dosearch/@isnew/desc?mod=17&lang=EN&categories=Outboard$ . When you get the download, scroll down to page 14. I use the Seloc manual from this site, the factory manual is best, but as a beginner, as I was nearly twenty years ago, the Seloc did me...
  4. haventaclue

    Serial number again

    I don't often disagree with flyingscott, but I'm getting that number as Belgian built 1992 which the decals match.
  5. haventaclue

    Quiksilver throttle/shift cable ends Merc part no. 43433

    https://www.ebay.com/itm/325507480174
  6. haventaclue

    what year and hp

    The number is 1980/81 https://www.marineengine.com/parts/mercury-outboard-parts/45-1-cyl/9258281-and-up-bel Parts list
  7. haventaclue

    What year

    That is a 1993 number Yamaha Mariner
  8. haventaclue

    Hi

    HP would help, but the number is coming up as 1984
  9. haventaclue

    '87 25hp long shaft model id location?

    https://www.marineengine.com/parts/mercury-outboard/index.php .Put your serial number in here and it'll bring up what you need. Or just post the number in the forum and someone will be able to tell you
  10. haventaclue

    Help identify model year and maybe even manual for Mariner outboard motor.

    You have an 1987 , https://www.marineengine.com/parts/mariner-outboard-parts/4a/6e0001011-and-up-m . If there is a Yamaha dealer anywhere near you they will be able to help as well as this is a Yamaha 4 painted in Mariner colours
  11. haventaclue

    Mariner 15 HP what year please

    That is an 1986 number, https://www.marineengine.com/parts/mariner-outboard-parts/15c/m684000101-and-up
  12. haventaclue

    Yamaha/Mariner prop fitment

    Great stuff .Glad to hear it's running well. I missed out on one of these a few years ago. My wee pet, RIP, reckoned if I got another boat, she was getting another dog, three boats and three dogs were more than enough about the house:LOL:.
  13. haventaclue

    Yamaha/Mariner prop fitment

    That is a nice clean looking Yamaha, sorry, Mariner:D Merc Marine collaborated with Yamaha from mid '70s through to mid '90s. So what Yamaha did was use their older models, painted them Mariner grey and badged them as such. They were for sale mainly in Asia and Europe. Hey Graham Lamb I was...
  14. haventaclue

    Yamaha/Mariner prop fitment

    I got my hubs here, https://www.hmshubs.com/products/ ,and I watched a video on youtube. Not this one, this is newer than the one I watched, can't find the other. , I had a bit of pipe as a guide with a piece of s/s exhaust pipe adapter cut to cover the hub cavity pushed down inside. Put the...
  15. haventaclue

    Yamaha/Mariner prop fitment

    On the Yamaha is the three blade prop from my Merc900 but plenty of room for the castle nut to seat, ignore the crappy stand, it was thrown together from scrap I had lying around.Jeez I'm having a bit of bother working in this new layout.
  16. haventaclue

    Yamaha/Mariner prop fitment

    I used the Yamaha thrust washer on the inside and a spacer on the outside, it left the castle nut too far out to get the cotter pin in so I used a locking nut. This is the Yamaha nuts and washers that were there and used by me, except for the castle nut, originally. So I'm thinking you have...
  17. haventaclue

    Yamaha/Mariner prop fitment

    I have used a Merc prop on an 1981 Yamaha 75, borrowed off my '69 Merc800, so if it fits and as your Mariner 40B is a Yamaha, then it will work.
  18. haventaclue

    New lower unit for my merc 115 4 cyl need shift shaft upgrade

    Curious as to why you need to pull the powerhead.
  19. haventaclue

    Shift rod won't go back in.

    Lower unit has to be opened and rod inserted into the cam.
  20. haventaclue

    Unknown 40hp mercury

    That number says 1994 and not exactly your motor but the wire colour code are the same https://maxrules.com/oldmercs/Wiring/1966ona/60.jpg
Back
Top