Logo
FULL SITE MENU

Search results

  1. G

    Tachometer question

    Thanks for the response. When I checked for voltage at the ground post (with the ground wire connected), there was about 9.5 volts. Every time that I checked for continuity for the ground post to a good ground, the screen on my meter would go blank. If I disconnected the ground wire from the...
  2. G

    Tachometer question

    I recently bought a Cajun Bass Boat that the tach wasn't working. I got under the dash today to see if the wires are connected and to the right posts. Everything looked good so I started checking for continuity from the tach to the engine. Everything appeared to be ok until I checked the...
  3. G

    1989 Force 150 Compression Question

    Thanks for the tip on using the Power Tuner/Engine Tuner. I'll give that a try. Merry Christmas
  4. G

    1989 Force 150 Compression Question

    What a difference a gauge makes. All plugs removed. I went to Oreilly's and got their gauge to see what it would show. The low is about 130psi and the high is about 145. The other 3 are about 140.. #5 is the low and will keep an eye on it to see of it changes after running it some. I have 2...
  5. G

    1989 Force 150 Compression Question

    I'm the new owner of a Bass Boat with a force 150 outboard on it. The engine is easy to start, runs great and will push the boat about 46mph. I did a compression check to see if all 5 cylinders were equal and they are all within about 5psi of each other. Here is my question: The compression on...
Back
Top