Logo
FULL SITE MENU

Search results

  1. G

    What engine and year Honda outboard do I actually have?

    Had my Honda 9.9 HP stolen a few weeks ago off my boat, so I went online and purchased a used Honda 8HP. Tag on frame says BZBC-1500010, Number stamped on front of engine says BF75L-1700010 (last 2 numbers “10” are not actual numbers but close enough). Is this an 8HP or 7.5 HP and what year is...
  2. G

    OMC 800 Stringer shift cable interchangability question.

    I have a question for the OMC guru’s here. I have to replace the shift cable on my OMC 800 Hydro-Mechanical drive. The current part number on my cable housing is 982795. My question is this. Is the cable replaceable with any other 800 OMC cable numbers such as a 982802 or a 982563 or a 982951...
  3. G

    Changing 800 Stringer Impeller with Drive on Boat

    Need some advise for someone who has never replaced a 800 Stringer Impeller! My question is this, I have 1985 800 Stringer Drive and I am considering changing the drive water pump impeller while the drive remains attached to the boat. There is no problem with it now, I just don’t know the...
  4. G

    Stringer Tilt Cover Bolt Extraction

    "Hey Gang, I need your help ag "Hey Gang, I need your help again on my 1985 OMC 800 Stringer tilt system. As you can see from the picture below when I attempted to remove the 3 small bolts that hold the worm gear cover on, two of the 3 bolts snapped off with very little effort. 1 bolt came out...
  5. G

    Honda 99 HP New Carb Low range speed issue

    "I need help with my 1987 9.9 "I need help with my 1987 9.9 HP Honda 4-stroke outboard kicker and its low speed rpm problem. Last winter I put a brand new carburetor on this engine. It idles great and runs fine but there is a band from idle to maybe 2000 rpm that it just won’t stay at. It is...
  6. G

    10 quarts of oil in a 1985 OMC 50L oil pan

    "Took my boat out yesterday an "Took my boat out yesterday and decided to change the engine oil when I got back since the oil was still warm. Engine is a V-8 OMC/GM 305cid 5.0 liter engine and an 800 Stringer on a 1985 Bayliner Trophy. I ended up siphoning out 10 quarts of engine oil instead of...
  7. G

    Stringer Tilt Housing Shaft Seal Replacement

    "Like many stringers, my 1985 "Like many stringers, my 1985 V8 / 800 stringer tilt would only work going down and not come up unless assisted by hand or a rope. Today I opened the tilt housing and lots of grey goo and water came out. I have already purchased the complete tilt clutch housing...
  8. G

    Stringer 800 and 305 V8 exhaust hose replacement question

    "I need all of your expert OM "I need all of your expert OMC help with my 1985 Trophy (V-8 5.0/305cid GM engine and 800 stringer outdrive) exhaust hose replacement. I need to replace the wet exhaust hose that comes from the exhaust manifold risers to the elbow tube and also the hose that...
  9. G

    OMC stringer Steering Cable Length

    "I need help with a Tru-course "I need help with a Tru-course steering cable replacement question. I own a 1985 21ft Bayliner Trophy Hardtop with Tru-course cable on an OMC 800 Stringer outdrive and 305cid/5.0 V-8 Engine. My question is what length tru-course cable is required for replacement...
  10. G

    Chev 50305cid Riser Gasket Question

    Just replaced the riser gasket Just replaced the riser gaskets today on my 1985 Trophy that has a Chev 5.0/305cid engine. My question is am I supposed to use some Permatex or other hi-temp gasket sealer on those gaskets or can they just be put on plain (That's what I did)? Both the manifold and...
  11. G

    Honda Carb rebuild Kit Where to Find

    Thanks to Just-In-Time I was a Thanks to Just-In-Time I was able to locate the well hidden model number (BABE-1000487) of my Honda 9.9hp outboard. Now I want to order a carb rebuild kit and I have not been able to locate a website online to order one from. Ordered several parts for my 1985...
  12. G

    What year Honda 99hp is this

    "Recently purchased a 21ft Tro "Recently purchased a 21ft Trophy with a Honda 9.9 kicker on it. Wont idle without choke out a little bit so I think it is time to rebuild carb. Dont know which rebuild kit to order because I cant figure out what year it is. Plate on engine has no markings or...
Back
Top