Logo
FULL SITE MENU

Search results

  1. T

    gray/black oil under outboard pan

    Hello everybody I have been continuing fixing up my old 1972 25 johnson. I noticed about 2 weeks ago a bunch of tacky gray and black oil gathering up where the midsection meets the pan and was starting to leak onto the midsection. After that I pressure washed it all off and after only a few...
  2. T

    '72 johnson 25 idle

    I have a question regarding idle on this early 70's 25. The motor will not idle unless the roller is just passed the 2nd mark on the throttle cam. Im not sure if this is normal or if I am advancing the cam too much for idle. Even past the 2nd mark it will occasionally spit and sputter. Also the...
  3. T

    1972 Johnson 25 Idle issues

    I have a 1972 Johnson that has an idle issue where after you return from WOT the idle slowly continues to fall until the motor dies. I have checked the timing throttle advance and got it dead on and have set the idle mixture screw to the perfect point. I got a clear fuel line running from the...
  4. T

    Early 70's Johnson 25, Kill button doesnt work

    Ive been working on troubleshooting a problem on a 25 Johnson with points ignition where when I press the kill button all that I can find that happens is spark weakens a little bit, not enough to stop the outboard. I changed out the switch and inspected under the flywheel and nothing seems out...
  5. T

    Green-light grayish gear oil

    Good evening everybody I’ve been out messing with my 7.5 Chrysler and it runs like a champ, I drained the gear oil tonight after about 4 hours on the outboard since I last changed it to see how the seals are in the lower unit. The color was mostly dark green, the color of the oil I put into it...
  6. T

    Serial # location on Chrysler made 7.5 Sea king

    So I’ve been working on a 7.5 Sea King and I need to know the serial number for it. The plate on the outboard mount with the serial # must have come off becuase it’s not there so I was wondering if there is any where else on the outboard with the serial number? I know for a fact the outboard is...
  7. T

    '83 Chrysler 7.5 Sea King, cant get water pump housing off

    So I decided to do an impeller replacement on an 7.5 chrysler outboard I recently got running. So I took the lower unit off and got the water pump housing unbolted and found a problem. The housing goes around both the driveshaft and shift shaft and the problem with that is the shift shaft after...
Back
Top