Logo
FULL SITE MENU

Search results

  1. C

    08 F250 Lower Unit Corrosion

    Its the lower mounting dampener.
  2. C

    08 F250 Lower Unit Corrosion

    I bought used twin 2008 F250's. When I removed the side cowling I noticed what I thought was excessive corrosion but I can't find what the part is in the manual. Any thoughts?
  3. C

    BF200 low pressure fuel pump

    My stbd outboard starting losing power. When I checked the filter housing it was less than 1/3 full when running. When I squeezed the fuel bulb it filled up then slowly drained back down to less than 1/3. Does that sound like a low pressure pump going bad?
  4. C

    BF200A2 Fuel Filter replacements

    BLUF: Looking for a guide on installing the mesh fuel filter (#4) on the fuel rail and the fuel pump filter on top of the VST, behind the injector base (#5). BACKGROUND I bought a rough boat with twin BF200A2. The stbd engine works great and the port, not so much. I've replaced all the...
  5. C

    BF200A2 Hi temp alarm

    ISSUE: I have twin 2003 BF200A2's. My port engine will go into a continuous alarm and the engine goes into limp mode after running at WOT for 20-25 minutes. I turn off the engine and re-start and it runs fine at lower RPM, say 4000, about the RPM I need to get on a plane. ENGINE READINGS I...
  6. C

    BF200A2 drop in RPM

    ISSUE: Port engine loses RPM, the old owner complained there was something wrong with the port engine. BACKGROUND I have twin BF200 A2 with twin external RACOR. The engines have less than 900 hrs on them. The old owner deferred maintenance which I'm correcting. I have replaced the RACOR's...
  7. C

    BF200A2 Thermostats and overboard discharge

    ISSUE: How long does it take for the overboard discharge to start working? BACKGROUND I just bought a used 1990 S2 Pursuit 265 with twin 2002 Honda BF200A2 with under 900 hours. When I looked at buying the boat both engines started. The boat was in dry storage and we had to use earmuffs to...
Back
Top