Logo
FULL SITE MENU

Search results

  1. J

    How tight should the remote oil plate be tightened

    Uhhg i had my motors rebuilt. I finally got the boat in, the motors broke in and they are running sweet. Except for the fact that i have oil coming out the bell housing. First thought was oil pan or rear main but i used a boroscope and could see the oil pooling on the remote plate. I remember...
  2. J

    Stacking fwc crusader exhaust gaskets

    Where does the single top whole gasket go. From what I understand it goes above the riser before the coolant gets sent to the heat exchanger. I will try to post some pictures and maybe someone can say which is right.
  3. J

    Need cam specs for 454 model 350 cam shaft

    I have pulled the motors for fresh rebuild. The machine shop has recommended going with roller cams because he states that he doesn't have much faith in new flat tapped lifters because Delphi does not manufacture them anymore and the are built over seas now. He was able to find standard rotation...
  4. J

    Which camshafts to use in 1983 crusader 454xl 350's

    I pulled the motors out of my chris craft tournament. They where still running strong but the port was leaking some oil and the starboard had a lifter tick so I'm in the process of getting ready to send them out to the machine shop to have them cleaned up. I was hoping to get some advice on...
  5. J

    Starboard 454xl 350 fwc running 190-200 degrees

    I have a 30 chris craft tournament. While the port motor runs 160 if pushing it runs 180. Starboard at idle stays 160 while running will goto 190-200. New impellor, new risers, new 160 stat fresh 50/50 coolant. At idle checking temps with the temp gun the manifolds run 200+ while the risers run...
Back
Top