Logo
FULL SITE MENU

Search results

  1. E

    Merry Christmas to all

    [b][PLAIN]"<"
  2. E

    How to get more horsepower

    "If I happen to wake up one da "If I happen to wake up one day with the "mad scientist" & "Dr. Frankenstein" combined syndromes , I would probably consider replacing the A cam with a K or a V cam, then install a forged crank and set of pistons from the AQ151, then install an oil cooler, then...
  3. E

    Twin volvo 250s with 280 outdrive pros and cons

    "A few tips: 1) Have th "A few tips: 1) Have the boat surveyed by a professional surveyor. 2) Have a professional mechanic test engines (general condition, compression, etc) and drives if the surveyor does not provide that service. 3) The engines are Volvo marinized car engines...
  4. E

    43 Rebuild or Not

    "It all depends on what kind o "It all depends on what kind of a gambler you are. I would probably remove the heads first and have a look inside, but on the long run you will usually be better off with fresh power (rebuilt engine). "
  5. E

    Tilt mechanism how it works

    "Well folks, some time ago I p "Well folks, some time ago I promised I would make a post to this respect. So I have made two different descriptions: one for the two-wire mechanisme and another one for the 3-wire (even if some will call it a 4-wire, it is in fact a 3-wire system). Please note...
  6. E

    Float for a Solex 44PHN carburetor

    "Leo Lathman posted: "Leo Lathman posted: [b][i]Hey , anyone of you guys have a used Solex 44PHN carburetor laying around or even just the float ? I have been on the computer 4 days searching for a new float and no luck . Reply: Leo, those Solex sidedraft carbs are becoming a...
  7. E

    Automotive ignition components on marine gasoline engines

    "There have been some instance "There have been some instances where we have discussed the consequences of using automotive electrical components (which are usually non-ignition protected) on marine engines, yet some people still believe it is OK to use them. I think that the following links...
  8. E

    Bennett trim tabs simulator

    "It can be downloaded from her "It can be downloaded from here. http://www.bennetttrimtabs.com/simulator.htm In addition of doing some "virtual boating" without using any real fuel or blowing your engine , I find interesting to use the simulator to see how a boat reacts depending on the...
  9. E

    High rpm idle 1994 150

    on a flushing attachement rpms on a flushing attachement rpms on a 150 1994 yamaha is 1000 is this uncommon due to lack of back pressure or what
Back
Top