Logo

Search results

  1. F

    86 Yamaha 25hp full advance timing

    Long story short I have a early 80s Mariner that I installed a brand new 86-87 Yamaha powerhead, flywheel, and stator plate. now I am unsure how to set the fully advance timing. I am thinking it needs to be 24 degrees before TDC. My timing pointer is lined up to show accurately tdc marked on...
  2. F

    Still stuck at 3800 RPMs

    I have a 86 Mariner 25hp (Yamaha) recently rebuilt, honed, and re ringed. Compression is around 120 on both. Rebuilt the carb. New coil pack and cdi unit. New plugs also. I checked and set the timing at 25 degrees. Also played around a few degrees both ways. Pumping primer bulb does nothing...
  3. F

    1980 mariner 25hp DVA test

    Motor will not exceed 3k rpm when under load. The last lake test the rpms started around 3k but slowly climbed to ~4100. Once I throttled down it would never exceed 3k again. My theory is the performance degraded once the motor warmed up. Compression is 120 on both cylinders. Starts 1-2 pulls...
  4. F

    85 25hp Yamaha/Mariner flywheel swap

    Found a new old stock 86-87 Yamaha engine. I plan to use in my 1980 mariner 25ml. Starting the swap swap over and notice the fly isn’t fitting right. Looks like the Yamaha crank is slightly larger in diameter. Top photo is the new block. Second is the current mariner block. Can someone...
  5. F

    Mid 80s 30hp mariner compatibly

    I currently have a Mariner 25m 695 307037. Long story short I have a few seized head bolts. Now I am looking for a replacement block or powerhead. Came across a Yamaha 30ae 689 on eBay. My question is would the flywheel, stator plate, and lower unit be compatible with the 30hp Yamaha?
  6. F

    1985 Mariner 25hp WOT issue

    This is a new to new boat. 14ft skiff with a 1985/86ish Mariner 25hp. It’s a made in Japan model. My first outing the motor would not exceed 3000ish RPMs. Took it home cleaned the carb, fuel pump, new plugs. Second test run I had full power and ran perfect. 3rd run the boat ran great for about...
Back
Top