Logo
FULL SITE MENU

Search results

  1. D

    Trim sensor/gague

    Hi, I have a recent issue with my trim indication system. The gauge says teleflex as a company name on it and the system has worked fine up until I serviced my trim/tilt unit. My trim indicator needle is stuck in the up position both when i turn the ignition key and when it's completely off...
  2. D

    Yamaha 1987 9.9 and 15 difference

    Hey, I've looked through the parts lists for the 9.9 and 15 hp model to see what the differences are but I can't find anything different in the reeds nor the carb itself. Is it just the displacement of the engine that's different? Usually 9.9 are just downtuned 15 hp engines, is that not the...
  3. D

    Hydrofoils

    So I got a 15 hp evinrude and it has problems getting on plane (really barely wants to) with only one person in it, with some weight at the front it's no problem it planes out fine. So i added some hydrofoils and again with two people in it, one in the back. The issues come when I plane with one...
  4. D

    1982 Evinrude 15 hp

    Hello, if anyone remembers me; welcome back to me 15 hp evinrude. I've completed a few stints with my rebuilt engine and it runs good save for one issue, it likes to stall. So when i start it I turn the gas all the way up (as far as it will go in neutral), open the choke and pull once or twice...
  5. D

    1982 Evinrude 15 hp sluggish

    So my engine starts great, first or second pull cold and when its warm you just need to pull the rope a little bit and it jumps to life. My issue with it now is that I feel like it responds to the throttle a little slowly and boggs a little bit. When I pull the spark leads the engine will keep...
  6. D

    1982 Evinrude 15 hp

    Hello, it's me again, I have now completed the restoration of my engine and it runs good in all aspects but one, cooling. Before the restoration I had water coming out the telltale but that's it, the water was just warm (I also ran without a thermostat). After restoration I now have a...
  7. D

    1982 Evinrude 15 hp

    Hello, so I'm working on this thing still and things are progressing somehwat slowly due to parts arriving from all over the place still but I've got a question in regards to the ciompression, I've measured mine at 95 psi on both cylinders and I'm wondering how that sounds. I've read a bit...
  8. D

    Evinrude 1982 15 hp Cooling

    So I just pulled the cylinder head off the engine to check on some bad cooling issue I've been having (cylinder walls and everything looks really great, some carbon ofc but really okey) and it's pretty clean around the watter jackets too, so the problem has to be deeper in the engine, it has a...
  9. D

    Old motorboat

    Hey, so I have this old glas fiber boat, noticed it was sitting way below the painter water line and so I lifted the "top" off which was glued and pop rivited to the hull and there was this mass of foam in the back which was soaked with water and then I also found a cavity in the front hull...
  10. D

    1982 Evinrude 15 hp

    So as the title says I have an engine which now doesn't want to start after previously doing so. It has compression, spark and a cleaned carb and a recently rebuilt fuel pump, the fuel system has no airleaks. It has always had trouble with the idle and was low on power under load too so I...
  11. D

    Evinrude 1970-1980 running bad

    Hey there, I have a question to anyone who is willing to answer, I've been working on my 15 hp evinrude (like 1970) or so, and ive fixed the foot which had a problem with the clutchdog cradle and now im working on the powerhead; my issue is that it either doesnt get up to high rpm or doesnt want...
Back
Top