Logo
FULL SITE MENU

Search results

  1. C

    1985 7.5 dropping a cylinder

    Hi All, I have a real beauty of a 7.5 serial # 6547217 brown stripe that looks new but in the test tank it randomly drops a cylinder at idle and dies. When I say randomly I'm not sure if it's 1 or 2 but it will die. I have the original Merc manual as my folks were a dealer and sold this motor...
  2. C

    1985 XP150 what is the minimum compression? I gotta be close

    Compression is between 80/91 lbs all 6 and seems to have 4 cylinders with no spark, if any help top 2 left bank will fire. Thank you in advance Mark
  3. C

    Drive oil in bilge

    Good morning all, Working on a 2015 Bennington 25' 350 Mag B-3 and the reservoir keeps going empty, bottle and hose look good but have residue on transom housing just below the input shaft from the drive, pulled drive, bellows dry. I'm leaning towards a bad plastic fitting at the transom and...
  4. C

    2011 5.0 MPI stumbles at 2000

    Good afternoon all, I have a 5.0 MPI that has had to many hands on it, we put a new long block in it last fall and sent it to bed. Came back this spring to get running and after all new fuel pumps filter fuel line from tank to pumps we now can hold a 30 PSI on the fuel rail but it stumbles...
  5. C

    2004 250 Verado stearing cylinder leaking

    Good Morning, Can anyone tell me what I'm in for on this job? It's leaking from the top down and I'd say seals but until we get it off and disassemble it I don't know. Now how much time am I looking at and do I need special tools for the repair? If it needs the entire cylinder are they...
  6. C

    250 Verado power trim works at motor not at helm

    1B055588 serial # has seen salt water then shipped up north to fresh. Was in a storm Monday and took on water, I don't know how much but everything seems to work but the PT at the helm. All connections look good and tight, nothing seems to stick out but, when you turn the key switch on the two...
  7. C

    What to do now

    Hi All, 1st post and just came off the lake and part # 892664T01 appears to be leaking and it is now NLA! Water is leaking out of the housing where the two small hoses enter, any ideas? Thank you in advance. Mark
Back
Top