Logo
FULL SITE MENU

Search results

  1. P

    Johnson 60hp VRO outboard choke

    I functions with the key push but I still have to mess with it after starting every time
  2. P

    Johnson 60hp VRO outboard choke

    That is the one with the red switch on it right? I have to manually turn that from closed to open and back for the engine to function normally and not stall
  3. P

    Johnson 60hp VRO outboard choke

    I have an 86 Johnson 60hp outboard and have done the vro conversion to get rid of the oil pump. It ran fine for awhile and I cleaned the carbs and did the adjustments the book says to do to put the motor and controls within spec. I have discovered that if I start the engine and try to...
  4. P

    1978 Montgomery ward sea King 35hp outboard flywheel

    So we were removing the flywheel and it broke. Now I'm catching hell trying to find a new flywheel. S/N 30035 on the motor. Stamped number on the flywheel is fwm2016. Can't find it anywhere.
  5. P

    88 Johnson 60 vro power loss

    So I did the fuel pump conversion and now it runs. Put in the water today and every time I either tried going forward or back the engine just died out. In the yard I could throttle it all the way out with no problem. But under load the engine bogs out and dies. No change in how quickly it dies...
  6. P

    Johnson 60 spitting fuel out of pump seam on port side of engine under starter.

    Leaking from the center seam in the middle of the pump. Don't know if I can just replace the seal inside or the whole pump. This is the pump that's in it. Not sure if it attached from my phone.
  7. P

    Johnson 60 spitting fuel out of pump seam on port side of engine under starter.

    Just got this boat from my wife's grandma and when I went to put fuel to it and primed the line it started squirting fluid out of the seam of the pump. Looks like the conversion was done
Back
Top