Logo
FULL SITE MENU

Search results

  1. HiZ

    01 4.3L Gen II Alpha - winterizing - issue

    So, here is the deal Friend has this set up and ususally sucks up coolant into the drained system from the drive IE:Big 6 gal drum with muffs This year he said it would not suck up the coolant. So I stopped over and helped split the case and check the impeller Perfect, no issues, no wear etc...
  2. HiZ

    115hp Tower of Power - no spark on 1,3,5 New switch boxes still nothing, help?

    Okay so what I have is an 83 tower of power on our little fishing boat here for the local lake Would run like garbage. Found that 1/3/5 no spark Replaced the switch boxes, still same issue I have eliminated the tilt switch, I have checked the bias voltages between the two and checks okay with...
  3. HiZ

    Mercury Hook up 100hp Optimax and 9.9 Pro Kicker - helping with external boxes and gauges

    Okay, so what I have is: a set of new control boxes a set of Faria gauges - fuel, temp, tach, speed new cables and rigging from one boat to another helping a buddy of mine that is kind of not mechanical I'm not sure how I get roped into this but I am So, the directions for the control boxes...
  4. HiZ

    SBC Exhaust riser - Rusty dusty - replacement>Sierra or BARR??? Pics inside

    Okay so I have this issue of a boat that I $ last year, used 2x's and have now pulled it out and am going through it. I found this: and and want to know, do I purchase Sierra or Barr kits? This is only on the Port engine and not on the stbd, it appears that the stbd has been apart from...
  5. HiZ

    OMC 260 GM 5.7L with 800 Stringer drive - Dies once under load

    Okay What I have is an OMC 5.7L GM 350 260hp Equipped with a 800 Stringer drive the boat is a 79 IMP INCA Low hours and looks great Now for the running issue Took it out for the first time and it ran great accept when warmed up under load Runs all day on the ears on land. About 10 min run...
  6. HiZ

    1988 Force 85hp - runs great accept the shifting - From "N" it dies

    The engine runs great but will die when shifting from Neutral Each time that the boat is shifted it will die off like hitting the key, idle is good, it runs across the power band fine Carbs are clean, fresh fuel, primer bulb and fuel system is good I am curious to know what is going on with...
  7. HiZ

    Yamaha YAMS stern drive / Alpha type drive - reverse/shift cut out adjustments

    So, I have this YAMS Thing and it will KILL when shifted into reverse Any thoughts on how to adjust/remedy? Runs great, accept it's like turning off the key when going into rev
  8. HiZ

    175 hp Chris Craft MCLR #88305 > first start up - Dual carb set up > High rev at start

    Okay, hello out there. Here is the story My grandfather has owned this boat from 1974 until well today It had needed a repower and was converted to stern drive in the 80's He then started a redo in 2005 and as he has aged slowly has not been able to work on it, thus it sat for the past few...
Back
Top