Logo
FULL SITE MENU

Search results

  1. B

    Changed a seal.......now BF90 stuck in neutral

    https://www.boats.net/catalog/honda/...03/shift-shaft 2003ish BF90 I just replaced a shift rod seal. I removed the seal (29) and seal holder (11), then installed a new seal and seal holder. The motor was in neutral when I disassembled then assembled everything. It certainly felt and...
  2. B

    Hard shifting BF90

    The bf90 on my 17’ 03 Arima Sea Pace shifts way too hard. It is not the control box or the cables. When the shift cable is disconnected at the motor everything is smooth as silk. With the cable disconnected, it is impossible to rotate the shift shaft by hand. With the cable disconnected...
  3. B

    Minimum Compression for a small 2 hp two stroke

    "Is 60 psi compression too low "Is 60 psi compression too low for a small two-stroke outboard? (2hp, 1996, Evinrude). What do they have new (typical)? Regards,"
  4. B

    1996 2hp Pristine evinrude wonbt start

    "I have a 96 2hp evinrude i in "I have a 96 2hp evinrude i inherited from my dad. It has been in storage for a long time. I dug it out (it looks literally like a brand new motor from the prop to the top) yesterday. I put fresh gas in it, stuck it in some water and gave about 10 pulls: it...
  5. B

    Recomended Spare Parts

    "I have a newly aquired 1979 1 "I have a newly aquired 1979 15hp Johnson motor. It starts idles and runs well. I will use it on a 14 foot jon boat in the NJ Salt Marshes and also on a lake in Bucks County Pa. What are good spares for me to keep with my tool kit on the boat? I can dig...
  6. B

    1979 Johnson Sea Horse 15 hp Question

    "I have just acquired a 15 hp "I have just acquired a 15 hp Johnson, 1979. I put it in a trash can full of water and it fires up very easily when dead cold and settles into a slow idle very nicely. When I open the throttle In Neutral, it winds up nicely to what I would say is 1/2 of its max...
  7. B

    2002 3 hp Yamaha Cooling System Check

    "I am a decent mechanic by hob "I am a decent mechanic by hobby but I have no direct experience with outboards. I have recently inherited from my Dad 2002(?) 3hp Yamaha. It has been used maybe once or twice. It runs great and starts easily and idles like a dream. However: I see no...
Back
Top