Logo
FULL SITE MENU

Search results

  1. tonyaus

    Yamaha F90 Cleaning out sump...

    Have a F90 Yamaha that has developed a milkshake in the oil.... Water in the sump... Have the powerhead off for necessary repairs... Wanted to know what is the best way of washing out the milky oil out of the sump. Hoping not to have to completely disassemble the midsection, but dont want to...
  2. tonyaus

    BF225 2006 Starts but wont run...

    Honda BF225 2006 with 1200 hours, serviced every 100 hrs... When I go to start it, it fires up as it should but will shut down after 1-2 seconds... If a use the warm up lever and keep it running at about 2000 rpm for about 10 seconds it will be fine. The idle seems a little slower and slightly...
  3. tonyaus

    V4 Johnson Gearbox interchange.

    Have a 140hp Johnson 1977 Model no. J140TL77S It needs a replacement gearbox, do any other gearboxes interchange to this engine? Or does it have to be a V4 1977 unit. I have a feeling these are unique to themselves... Can anyone confirm this??
  4. tonyaus

    Will this conrod fit this engine

    "Will a conrod from a 1992 115 "Will a conrod from a 1992 115hp Xflow fit into a 115hp 1996 Eagle powerhead?? Physical dimensions are the same. But the eagle rod has 3 holes around the big end. Part numbers for both engines supercede to the same number, but is this a case of you can use the...
  5. tonyaus

    150 HPDI 2001 Shop Manual

    Where can I get one of these f Where can I get one of these from? Preferably a factory manual. Even a Yamaha part number would help. Cheers
  6. tonyaus

    Props

    "Hoping someone has a formula "Hoping someone has a formula or prop calculator to give me an idea of what prop size to use. I know ultimately it will be trial and error but here in oz, props cost a fortune. Currently running a 220 yamaha excel with a 21" prop 6000rpm at WOT. Repowering with...
  7. tonyaus

    E Tec Diagnostic Software

    "Hi, Hoping someone can help. "Hi, Hoping someone can help. I have Evinrude Etec diagnostic software and a laptop but I have a missing link. I think I need a palm pilot of some sort and a cable that connects the palm pilot to the engine. Does anyone know what palm pilot I need and a part...
  8. tonyaus

    Weight of Johnson 36GT V8 Outboard

    "Hi, Just wanted to know if a "Hi, Just wanted to know if anyone knows how much a 1987 3.6GT V8 Johnson weighs or where I can find specs. Currently running a 220 Yamaha Excel and want to repower with the 3.6GT. If anyone knows the weight of the Yammi also that would be great so I can compare...
  9. tonyaus

    Big OMCbs 225 250 300hp

    I currently have a 220 Yamaha I currently have a 220 Yamaha Excel on my boat and looking for more power. I have access to a 225hp Evinrude 1991 that could do with a freshen up. My question is can the 225 be reworked with factory parts to put out maybe 250hp or should I just go in search of a...
  10. tonyaus

    90Hp 2001 Yam runs rough

    "Hi, Motor is a 2001 90hp Yam "Hi, Motor is a 2001 90hp Yamaha. It starts easy, idles well and runs great up high. Between about 1500 and 2000 rpm it runs really rough and shakes. Like its only on 2 cylinders. Comps are good.... Any other suggestions??"
  11. tonyaus

    Differences Between 24L and 25L Merc Powerheads

    "Hi, Thought I posted this ye "Hi, Thought I posted this yesterday but cant find it anywhere.... Im about to buy a 175hp Merc 1995. It looks to have had the powerhead replaced at some time in its life. How do I tell if its has a 2.4L powerhead or a 2.5L?? Hopefully without having to...
  12. tonyaus

    175hp Johnson Faststrike 1993 Playing up

    Have a 1993 175hp Johnson Fast Have a 1993 175hp Johnson Faststrike which is performing erratically.... It starts easy and Idles great. As I give it throttle it runs rough and dies out at 1500rpm. If on a rare occassion I get it past 2000rpm it will rev to 6000 rpm with a 28inch prop...
  13. tonyaus

    Johnson 135hp Ignition problems

    " Have 135 hp Johnson 1974 and " Have 135 hp Johnson 1974 and it wont start. Compression checks out fine but the spark has puzzled me. With the spark plugs out it will spark on all 4. My spark tester has a fixed gap of about 10mm. When I put the plugs back in there is no spark. If I put a plug...
  14. tonyaus

    90hp Yamahaneed ignition specs

    " As the subject says I need t " As the subject says I need the resistance readings for the ignition system on a 90hp yamaha 1997. My literature only goes to 1990.I need resistance readings for the stator, crank position sensor, and trigger coil. If anyone has these they will be greatly...
  15. tonyaus

    225hp Evinrude tacho problem

    " I have an evinrude 225hp 199 " I have an evinrude 225hp 1991 with 35amp charging system that recently started playing up. It was diagnosed as a stator problem. We put a new stator in and it goes great again except that the tacho no longer works. While cranking it, the tacho goes up to about...
  16. tonyaus

    Restoring an old evinrude

    I have a 1968 65hp evinrude w I have a 1968 65hp evinrude which im looking to restore to as new condition. Is there a website that will give me any info on these? I know there was one called something like oldevinrudes.com but it doesn t work. I really only need the color a decal scheme on...
  17. tonyaus

    Merc V6 oil injectionIt just doesnt seem right

    Have just rebuilt a 135hp Mer Have just rebuilt a 135hp Merc and in cleaning out the oil lines it just didnt seem right. From the outlet of the oil pump there is a hose that goes to a tee fitting where i assume this is where the oil is mixed. When i blow through the fuel side of this fitting...
  18. tonyaus

    Help with merc carbs

    I have a 70hp Mercury 1979. 3 I have a 70hp Mercury 1979. 3 cylinder twin carb. Carbs were flooding after it sat for 2 years. Carbs were removed cleaned and new inlet needles and seats fitted. Float levels set exactly as per the manual. Started motor motor ran fine for 10 mins then it starting...
Back
Top