Logo

Search:

Type: Posts; User: bondo

Page 1 of 4 1 2 3 4

Search: Search took 0.04 seconds.

  1. Re: Shift interupter switch won't move enough to engage the kill function

    Ayuh,..... Sounds like an ole MC-1, the reverse lock,....

    Don't try to trim it in reverse,....
  2. Re: any ideas on getting a starter out of a 5.7 when the bolt heads are stripped studs frozen?

    Ayuh,..... No Doubt, pull it, 'n get it over with,.....
    The smaller headed bolts only came to be, maybe 10 years ago,....
    Prior to that, 9/16" was standard issue,.....
  3. Re: 1982 Yamaha 55hp C55ELRQ no Reverse with exceptions.

    Ayuh,..... Sounds like a controller problem,.....

    Are the cables movin' as they should be, or are they workin' as you explain, at the motor, under the cover,..??
  4. Re: changing a 318 standard rotation engine to a reverse rotation engine

    Ayuh,.... The seals are in fact different,.....
  5. Thread: 3.0 engine swap

    by bondo
    Replies
    2
    Views
    53

    Re: 3.0 engine swap

    Ayuh,..... Do the couplers bolt to the flywheel, or the crankshaft,..??
  6. Re: Low idle; Engine chocking/dying when warm (video)

    Ayuh,..... It's a SBC, probably a 350, maybe a 305,......

    The block casting numbers might tell ya which,....
  7. Re: Low idle; Engine chocking/dying when warm (video)

    Ayuh,..... Pull the fuel filter, 'n examine it's contents in a clear jar for anything but clean fresh gasoline,.....

    It sounds like a fuel delivery issue,.....
  8. Re: I can't find the starter on the engine! Help

    Ayuh,.... That appears to be the old style starter,..... it should look something like this,......
    27754

    Have you checked to be sure the starter bolts are still tight,..??
    You may have...
  9. Replies
    1
    Views
    125

    Re: Internal gas tank

    Nope, but I've cut an access hatch in the deck to get at it,.....
  10. Re: I can't find the starter on the engine! Help

    Ayuh,..... It appears to be a SBC, so the starter is on the starboard side, way down low, at the aft end of the block, held on with 2 bolts, which have 9/16" heads, pointed straight up,....
    ...
  11. Thread: Mercruiser 3.0

    by bondo
    Replies
    13
    Views
    254

    Re: Mercruiser 3.0

    Yes,.....
  12. Re: Looking for OEM ignition switch for old AQ130C/270

    Ayuh,.... I suggest you test the switch with a test light, rather than just assumin' it's the switch,.....
  13. Replies
    1
    Views
    68

    Re: Fuse Box Question

    Ayuh,..... Hard to say, could be either,.... Test it with a test light or multimeter,.....
  14. Re: 4.3 87 to 92 parts interchange with 93 to 95

    Ayuh,..... I'd stick with the 4bbl,..... The primary bores are smaller than the 2bbl, 'n the fuel economy could be better,......
    Gas mileage goes downhill, only when the secondaries are...
  15. Re: Chrysler 50hp (US Marine) 2 stroke outboard not running, stalls

    Ayuh,..... Sounds like bad gas, 'n a fuel system fulla crap,......
  16. Replies
    1
    Views
    151

    Re: Yamaha sterndrive mounting gasket

    Ayuh,..... Yer choices are,.... build yer own, or adapt somebody else's,.....
  17. Re: I am looking for an engine, but I do not know which one

    Ayuh,...... Looks like a BBC, probably a 454/ 7.4l,....
  18. Re: 87 SeaRay 3.0 Mercruiser/ Alpha Gen 2 no forward gear?

    Ayuh,...... Have ya checked the oil in the drive for debris,..??
  19. Replies
    2
    Views
    87

    Re: Voltage Drop at Accessories

    Ayuh,.... corroded wirin' connections,..... could be anywhere in the positive, or ground paths,.....

    start at the battery, 'n clean all the connections to shiny clean metal,.....
  20. Re: I am looking for an engine, but I do not know which one

    Ayuh,...... post a picture of the whole motor,.....
Results 1 to 20 of 70
Page 1 of 4 1 2 3 4