Logo

Search:

Type: Posts; User: racerone

Page 1 of 4 1 2 3 4

Search: Search took 0.11 seconds.

  1. Replies
    8
    Views
    21

    Re: 1990 evinrude 155

    A 155 HP commercial V-6 outboard
  2. Re: Electical Ignition Goof. Advice? 1985 Johnosn 50 hp

    Double check the wiring on the main switch !!----There should be nothing there to pop a 20 amp fuse !----Sure sounds like that battery switch has been wired WRONG for a long time.
  3. Re: 1987 evinrude 60hp low idle exhaust backfire.

    Model # of the motor ?----Checked the flywheel key ?-----Any evidence of water on the plugs ?------If this is a 49 cubic inch motor then compression is low.------The 49 cube motors alse suffered from...
  4. Replies
    1
    Views
    14

    Re: Seized/flywheel issues?

    I would remove the cylinder head and have a look at the cylinders.----All of the ignition coils have failed on these motors.------If they are still original then plastic pieces under the flywheel...
  5. Re: 1987 evinrude 60hp low idle exhaust backfire.

    Start with posting the compression numbers.-----Are you running it on a hose ?------Orange / stripe wires going to the correct coil ?----Orange / green on the bottom ?----Sure is a lot of $ spent on...
  6. Replies
    8
    Views
    21

    Re: 1990 evinrude 155

    It be 2 stroke.-----Props attach to the motor but FIT the boat / application.-----What boat do you have ?
  7. Replies
    58
    Views
    458

    Re: Cylinder bore question

    A new gasket would have all the words for you to read and heed.
  8. Replies
    58
    Views
    458

    Re: Cylinder bore question

    The one on the left was installed correctly.
  9. Replies
    58
    Views
    458

    Re: Cylinder bore question

    The #2 is top on port and #3 is bottom on [email protected] different thermostat / poppit valves in the picture.-----Were the head gaskets on correctly , yes , no , not sure ?
  10. Re: Johnson 150hp fast strike motor stalls while accelerating quickly

    Looks very normal to me.---Iwould not even bother to scrape the black stuff off.
  11. Re: Electical Ignition Goof. Advice? 1985 Johnosn 50 hp

    Remove positive connection on the battery.-------Check / inspect wiring on your battery selector switch.------Perhaps that switch is wired wrong.----Replace fuse on the motor.----See what happens.
  12. Replies
    3
    Views
    40

    Re: trouble shooting 25 hp evinrude

    I would be surprised if the carburetor kit did not fix it.----It is often the first thing that folks look at.
  13. Replies
    11
    Views
    57

    Re: 1986 Johnson 9.9 no spark

    On a scale of things and cost of shop labor these powerpacks are cheap.-----New one at authorized dealer where you are a regular customer comes with warranty I believe.
  14. Replies
    11
    Views
    57

    Re: 1986 Johnson 9.9 no spark

    new powerpack will likely fix it.
  15. Replies
    11
    Views
    57

    Re: 1986 Johnson 9.9 no spark

    My bet is on the powerpack.----The stuff under the flywheel is fairly reliable.-----Or test the sensor and charge coil with an ohmmeter.----Flywheel does not need to be removed for that.
  16. Replies
    58
    Views
    458

    Re: Cylinder bore question

    Wires on a VRO are for warning of a " No oil condition "-----I thought those pistons had low hours on them.-----Fact ----Most folks are unaware of how to test a warning horn or do a VRO consumption /...
  17. Replies
    58
    Views
    458

    Re: Cylinder bore question

    Post more pictures of the pistons.------Something tells me there might not be many hrs on the pistons shown so far.
  18. Replies
    2
    Views
    38

    Re: 85ESL69S Base Plate Assembly Binding

    Perhaps the plastic ring was not installed properly.----Show it installed on the base plate.
  19. Replies
    58
    Views
    458

    Re: Cylinder bore question

    Sharp eye to spot the 120 / 140 pages on the work bench.----Any more pictures of those 2 pistons and the other 2 pistons.------The color marking on rod was not due to anything inside the running...
  20. Replies
    58
    Views
    458

    Re: Cylinder bore question

    Well statement like " weak spark washing away the oil " just make me chuckle a wee bit.-----Many folks just do not know how oil works in a 2 stroke or what happens when mixed fuel goes through a...
Results 1 to 20 of 70
Page 1 of 4 1 2 3 4