Logo

Search:

Type: Posts; User: trojanboater

Search: Search took 0.00 seconds.

  1. Replies
    1
    Views
    8,132

    Re: velvet drive transmission

    I've done it on a 318 with a 71C to replace the drive plate. I was fortunate enough to have access to a heavy duty tripod w/ hand winch that setup on the deck over the motor. Used it to support the...
  2. Replies
    3
    Views
    394

    Re: 318 intake manifold

    Thanks. I'm looking for a gasket now and vaguely remember seeing one way back that had the metal plate but with a small (3/8"?) hole in the center and one that was solid to block the passage. The...
  3. Replies
    3
    Views
    394

    318 intake manifold

    So I did not install the steel component of the exhaust crossover gasket and now I'm replacing the gasket. I'm considering replacing the manifold as it's fairly beat up. It's FWC so maybe it's got...
  4. Replies
    5
    Views
    1,577

    "I replaced both harness'

    "I replaced both harness' on my boat fairly easily by using ABYC color coded individual wires and then placing then in some split loom. Not sure what you got but I had very few wires. 12V, ign,...
  5. Replies
    9
    Views
    3,096

    "Terry, My '71 31' Tr

    "Terry,
    My '71 31' Trojan is a great boat. I've done quite a bit of upgrades and some repair work but feel it's a great solid boat and worth the effort and expense. I expect it will be around for...
  6. Replies
    7
    Views
    255

    Thanks for the info. I had no

    Thanks for the info. I had not thought about air getting into the system only raw water flow slowing/stopping.

    I was plannning on replacing the raw water pump this winter as the bearings are...
  7. Replies
    7
    Views
    255

    "FWC engines, raw water flow g

    "FWC engines, raw water flow good and good psi test on fresh side. The current t-stat is the second this year, first was letting temp get to 220-240 before it opened while this second unit opens...
  8. Replies
    7
    Views
    255

    "I installed new 160f thermost

    "I installed new 160f thermostats this year on my twin 318s. At idle the stbd engine sits @ 160+ then jumps to 200f when the tstat opens,then the temp drops back down and this keeps repeating. The...
Results 1 to 8 of 8