Logo

Search:

Type: Posts; User: Jerryjerry05

Page 1 of 4 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    5
    Views
    34

    Re: Piston rings Chrysler 9.2 (1966)

    What rpm's does it make?
    You sure both plugs are firing?
    The diaphragm in good shape?

    Should be a tag someplace on the bottom cowl that has performance
    data on the tag???
    Then hook a tiny...
  2. Replies
    5
    Views
    34

    Re: Piston rings Chrysler 9.2 (1966)

    IF????? both pistons are at 70# ????
    I'd guess the gauge or the way the test was done was faulty????
    Depending on the flywheel? if there's a nut on top? you can remove the plugs and hook up a drill...
  3. Replies
    2
    Views
    34

    Re: 97 force 120 prop size

    The Laser 22p isn't what I'd call a "fishing" prop??
    Yours stainless or aluminum?

    You need to know "exactly" what the rpm's are to figure out the right prop.
    They sell a small portable tach,...
  4. Replies
    4
    Views
    37

    Re: 1984 Chrysler 140 Outboard

    Oil from the plugs??? That's a new one for me!!
    All cyl. or just 1 ?

    Check the fuel pump diaphragm and for water in the fuel for performance problems.
    Do a compression and spark test.
    What...
  5. Replies
    2
    Views
    50

    Re: No spark/ fuse somewhere

    Every Bayliner I've worked on had a fuse block under the dash?
    The wiring diagram for the boat??? Contact Bayliner
  6. Re: Chrysler 60ís 70hp remote control cable install issue

    Video?
  7. Replies
    11
    Views
    832

    Re: 1996 force 75 lower unit

    Mikesouth you need to start your own thread.
    Go to the Chrysler Force forum and look for the thread starter.

    boatsdotnet is a good place to look or Franz Marine.
    There are a few on ebay



    ...
  8. Re: Chrysler 75hp Bearing Cage or Lower Unit

    Look up "outboard salvage yards" "outboard salvage" "antique outboards"
    "Chrysler outboard used parts"
    I know there's a lot of old motors in yards in the mid-west. Google
  9. Re: 1996 Mercury Force 40 ELPT two cylinder flywheel torque

    85-90#
  10. Re: Chrysler outboard only running on one cylinder

    Pack is the CDI module.
  11. Re: Chrysler outboard only running on one cylinder

    NO FIRE OR INTERMITTENT ON ONE CYLINDER:


    Check the stator resistance, you should read 680-800 ohms (factory) and 400 —500 (CDIIRAPAIR) DVA 180V or more from blue to yellow (Note — On some two...
  12. Re: Chrysler outboard only running on one cylinder

    What ignition system do you have? Picture of the components?
    You need to use a photo sharing site to add pics.
    After 5 posts you can add them.

    Prestolite ignition? or the original Chrysler ??
  13. Replies
    3
    Views
    94

    Re: Control cables

    Yes buy a Mercury style shifter and cables. :(
    You'll also need the newer style wiring harness too. :(

    What style shifter do you have? side mount?

    Ebay is a good bet.
  14. Replies
    2
    Views
    95

    Re: 1984 Chrysler 140 Outboard

    The original wires came in pieces, the end, called a "sparkie with spring" $6-7 each, still available.
    The wire is NLA so use 7 or 8mm what ever fits best.
    They do sell the sparkie here and other...
  15. Re: Wanted 1996 Gamefisher / Force 9.9 Steering Bracket

    The part fits Mercury and Force and Chrysler and Sears and a few more.
    Maybe try Google for Marine Salvage or Outboard salvage.
    In the Midwest there are a bunch of salvage yards.
    Good hunting!!
  16. Replies
    1
    Views
    176

    Re: Fuel tank capacity

    The one I had was 102gal.

    Those kind of questions can best be answered by Bayliner.
    Send them your questions and include the hull ID#
  17. Replies
    5
    Views
    222

    Re: Does quicksilver make Force parts?

    There are 2 on ebay
    Starting at $56 with free shipping.
    This probably won't pay shipping to AU???

    Can you find a junk outboard yard or marine salvage?
  18. Replies
    5
    Views
    222

    Re: Does quicksilver make Force parts?

    boatsdotnet??
    eBay ?
    What parts?
  19. Re: 1978 85 hp Chrysler with 1991-1994 90 hp Carbs

    The float needs to be flat, no light.

    Seems like the bigger the jet, you'd run rich?
    I'm not a carb expert by any strech.:0
  20. Re: 1978 85 hp Chrysler with 1991-1994 90 hp Carbs

    The idle air jets don't affect anything but the way it runs at idle.

    Floods and dies or runs out of gas?
    Seems the smaller jets would restrict the intake???
    What rpm's at idle, in gear, in the...
Results 1 to 20 of 70
Page 1 of 4 1 2 3 4