Logo

Search:

Type: Posts; User: newyota

Page 1 of 4 1 2 3 4

Search: Search took 0.00 seconds.

  1. Replies
    9
    Views
    110

    Re: Lower Unit Blues

    Method I heard of ,,remove shift shaft and tap brass bushing with 1/4 x20 thread and use a piece of threaded rod and a steel plate and nut to act as puller.
  2. Replies
    9
    Views
    110

    Re: Lower Unit Blues

    Yes.Look at the parts diagram.O ring down inside the brass bushing where rod goes thru.
  3. Re: 1990 25hp Johnson shutting down after a few seconds

    Sounds to me like your slow speed circuit is clogged and with primer pulled out you are feeding it fuel then when pushing it in it cuts off any fuel and dies.I had a similar problem on my 20hp.Hard...
  4. Re: '93 25HP J25RETS won't idle below 900RPM

    Sounds like possible sucking air. Low speed circuit still has an obstruction. Check key way?
  5. Replies
    4
    Views
    57

    Re: 86 EVinrude 50hp just wants to click

    Did you try and jump the switch?In the past when I have had an issue like this no matter what type of engine it was either a weak battery or some corrosion, no matter how slight or a loose...
  6. Replies
    4
    Views
    112

    Re: 1985 Johnson 30 hp wont fire

    Did you check the ground for continuity from the CDI to the block?I lost all spark acouple years ago on my 1985 20hp out on the water and almost ordered a new CDI.Checked the eye terminal on the...
  7. Replies
    7
    Views
    196

    Re: Aftermarket vs OEM Fuel pumps

    Put an OEM kit in my pump two years ago without any issues.



    did puyt one aftermarket pump on a 69' 33hp skitwin and had seeping isues around screws.
  8. Replies
    9
    Views
    301

    Re: Johnson 35 running but not for long

    Sound like high speed circuit clogged or gasket that goes around the high speed tube that gets sandwhiched bewtween bowl and carb body could be bad.Just had that issue with gasket on a motor.Bogs at...
  9. Re: 1986 J15ECDE Stalls at idle speed wont restart

    Sounds like you might be fouling/flooding the plugs as you idle down and once they dry off alittle you start again.Pull the plugs and see what they look like when it stalls.Did you pull the carb off...
  10. Replies
    16
    Views
    215

    Re: 1986 Johnson 9.9 no spark

    Did you check the ground for the power pack for continuity to the block?I lost all spark because of that and almost bought a power pack .Glad I checked the ground first.
  11. Re: 1985 Evinrude 30hp Armature plate problems

    Think your confused on the terminology(armature),think your referring to ignition plate assy.I have a 1985 20hp and a 1988' 30hp I tore down for parts and they have five wires on the power pack side...
  12. Replies
    4
    Views
    238

    Re: Fun with 25hp to 30hp conversion

    Thanks.
  13. Replies
    4
    Views
    238

    Re: Fun with 25hp to 30hp conversion

    Thanks for the response.Have not checked the compresion since last year and it was close to 120 I think .I did put the 30hp intake on tonight and when I get a chance I will give it another go on the...
  14. Replies
    4
    Views
    238

    Fun with 25hp to 30hp conversion

    Hope I do not get beat up to bad on this thread.I know this subject has been brought up many times and I found plenty of info on it, but not anything on this question..Acouple of years ago I...
  15. Re: 97 Evinrude 25hp 2cycle idles a bit rough, coughs or pops on idle, dies frequently

    Sounds like a lean sneeze.could be a leaky seal or gasket.Dirty carb etc.Do the things you said and do a search here on the subject for now ,plenty of threads on this subject to get you started.
  16. Replies
    9
    Views
    269

    Re: 1981 35hp vs an 82 or later 30/35hp

    Yep..spot on.thanks.
  17. Replies
    9
    Views
    269

    Re: 1981 35hp vs an 82 or later 30/35hp

    22774
    Thanks..I just got the model # 35603S which makes it a 76'.Person I am dealing with by text has no experience on the subject.If that is the case a 1988 long shaft lower unit and shaft/shift...
  18. Replies
    9
    Views
    269

    Re: 1981 35hp vs an 82 or later 30/35hp

    Not sure.thanks fdrgator for the help.Just got the model#35603s.. it is a 76'
  19. Replies
    9
    Views
    269

    Re: 1981 35hp vs an 82 or later 30/35hp

    Thanks. Will have to get some more info.
  20. Replies
    9
    Views
    269

    1981 35hp vs an 82 or later 30/35hp

    Was sent poor picts of a supposed 93 35 hp.(no model #) and the pictures did not match the 93.The exhaust leg still has the small access cover on it which seems to have been not on 82' and later...
Results 1 to 20 of 70
Page 1 of 4 1 2 3 4