Logo
FULL SITE MENU

HONDA BF225 CONTINUE BEEP AND MIL ON

M

markvouno

New member
. I have a Honda BF 225a 2006. When the switch is in the ON position after the check is done, after a while the beeps begin. When I start the machine it remains steadily waiting for the MIL and the beeps continue. The machine seems to be working properly. The MIL remain ON no flashing , the green light oil pressure ON and have beep.
 
I have checked the water sepoarator . there is no water and it works properly. I have checked many sensors and according to the instruction manual there is an issue in the ECM. the problem occurred after a year's standstill. Ican't bilieve it has a problem. Please help if need something to check . The light of the MIL is ON no flashig and intermittent beeps . The problem start after 2 sec when move the key from OFF position to ON and to be continued when it run engine . I don't have an indication of temperature or oil pressure .
 
You say that you have a manual. Is it the Honda shop manual?
If so, there should be instructions for reading fault codes. If there are any codes, that might lead you in the best direction for figuring this out.
 
Thanks for your answer .I can't get codes. when I put the scs to get codes the mil lamp does not blink. I have found an ECU 34750-ZY3 A04 from a honda bf225 of 2007. my honda bf 225 of 2006 wears ECU 34750-ZY3 A01 . Can I fit ECU 34750-ZY3 A04? Please help
 
I'm sorry, but I can't answer that question. I have no knowledge or information about cross referencing parts like that.

I do hope that you get the problem sorted out though.

And I hope you would be so kind as to let us know how you get on.

Good luck.
 
Back
Top