Hi Guys im rewiring whole boat for a friend, Suzuki harness presently getting power from house circuit which I know is very wrong.
trying to work out control wiring to the battery, would really like a detailed diagram.
I suspect one of the white wires to ECU should go direct to start battery...
With reference to the Suzuki wiring harness within the boat, there was a red & black (small wires say 1.5mm2 or 16AWG) running from the helm suzuki harness down to the back of the boat to the battery.
Im wondering what the function of this power supply is, considering the outboard itself is...
Its a 2015 model 34200-96L1.
Trying to connect fuel tank sender unit to Suzuki multi function gauge.
I know where the red was connected but not the black.
(Red & black twin running to sender)
For what its worth the sender is presently reading 30 ohms.
Thanks
Mark
Hey guys I was searching for starter parts on this site for my Force 9.9 model 92F5B.
Part #18
817811A 1 - Spool Kit
came up but was branded Quicksilver?
Is this correct?
Regards
Mark
A friend has had a couple of catastrophic engine failures, (pistons) seems to be detonation as the issue. hes currently rebuilding it again and would like to fit some sort of knock detector system or ideally auto retard aswell.
its a reverse rotation 350 SBC running MSD Street Fire ignition...
Hi guys
its leaking oil from the tiller end shaft seal.
I looked the part number up on Sea Star website, cant find it, can only find BA 135X7ATM. It looks very different in photos, very different seal housing.
The only ref I found was this in the FAQ:
I have a boat fitted with Sytten...
Hi Guys, trying to help a non handy mate.
New 250 4 stroke (I assume DF250 as it got mechanical shift/throttle) on a new 7.5m trailer boat.
Standard surface mount suzuki controller.
Absolute pig to select gear and then get back into neutral. Annoying when offshore but very dangerous around...
Anyone heard of them?
Are they still in business?
Do they still make the V3 external multistage voltage regulator?
I tried mailing them but got an inconclusive automated response.
Thanks
Mark
Yeh I know prob not the right forum but what the heck you guys have helped me with my mercruiser so why not ask you travel advice
going to show the wife & kids USA for 5 weeks late next year, sept/Oct.
LA first as they want to do Disneyland.
besides that no real plans yet, but definitely...
Hi, the port engine is constantly backfiring thru the carby. It does run ok at slow speed on flat water. When you try to accelerate it starts popin.
Both engines are remans about 60 hrs old, look to be in as new condition.
problem seems intermittent.
Mark...
For a friend.
he just bought a navman fuel flow sensor. Looks like the same one common to many brands.
Were not sure if it will work on this engine.
Theres only one line coming from tank. Goes straight to filter/seperator.monted on engine.
Im thinking it will work on that line. (Except wont be...
Hi guys
A mate has two 2010 mercruiser 4.3L EFI V6s', as they have been fitted into an older vessel its still running the old style instruments up front.
hed like to install a NMEA 2000 system to monitor engines, fuel flow etc... maybe Lowrance or Raymarine.
Whats his options?
are these...
Ok, Im planning to dump the two Petrol V6s, in favour of a single Turbo Diesel 6, in a Carrbean 26. (Yanmar Toyota Landcruiser)
Bravo 2 or 3?
Is the added cost of the bravo 3 justified?
Am I crazy?
Any Comments appreciated.
Sister ship...