Hello,
I’m fairly new at old Evinrude/Johnsons.
Trying to revive an Evinrude SporTwin 10, 10018-15029. I believe it is a '59 QD motor.
I rebuilt the Carb and modified the engine to a single fuel line and fuel pump. New Spark Plugs.
P.O. or someone was in there before and I re-assembled it like I...
Hello,
I replaced the impeller on my 1988 Gamefisher 9.9 hp Model # 225.581990. The water is now exiting thru the exhaust port at rear of engine. There is also a stream of water exitting the left side of the motor (looking from rear of motor) thru a hole in the upper gear housing.
1. Does this...
Hello,
A friend of mine has a MD# 9022A, SN E11586. He believes it is a 1974 or so.
Problem is he is in Phoenix, AZ and the engine runs fine.
When they head to the mountains (~6500 ft) it is very hard to start and runs poorly.
I thought this is just a air/fuel mixture adjustment.
He claims...
Hi Folks,
Awesome forum you have here. I hope I'm able to contribute somehow.
I have a question about the transom height vs. the engine leg length.
I thought engines came on short (15") or long (20").
My transom is 15" but my engine is 17". Should I raise the engine to compensate?
I can...
Hello,
It must have been mentioned on this forum before but I cannot find it with any of my searches.
I have a 1988 Gamefisher 9.9hp, Model # 225-581990, Serial # 1398.
I cannot see what the differences are between a 9.9 and 15 hp engine of this year other than the main jet in the carb.
Can...
Hello,
Need help identifying 2 outboards and their fuel mix ratio.
I believe both of these are Force engines.
7.5 hp Chrysler model # 72HOC S/N 1818
9.9 hp Gamefisher Model # 225.581990 Serial # 1398
Thanks,
Slimbob
Hello,
New to this forum. Looks very informative.
I bought a 4.0 hp Johnson Model # J4RCEC S/N 7938254 Belgium is under the S/N.
I need to know the Gas/Oil mixture so I can get her running.
Can anyone help out with this?
Thanks in advance,
Slimbob