Logo
FULL SITE MENU

Recent content by russ0943

  1. R

    Clear tube coming from fuel pump

    "94 3.0L I have a mechanica "94 3.0L I have a mechanical fuel pump with a clear tube coming off of it. It isn't attached to anything. The other outlet is the fuel line, which connects to the carb. What is this clear tube for? Fuel just jumps up and down in it most of the time."
  2. R

    Carb filter which way

    I have a holley 2bbl on my 3.0 I have a holley 2bbl on my 3.0L and was wondering which way the brass fuel filter goes that is right at the carb. One end has a cross-section that looks like a circle with a hole in the middle and the other end look like a circle with a donut shape taken out...
  3. R

    Pulled the distributortiming readjust

    I pulled the distributor cap a I pulled the distributor cap and assembly out in order to get easy access for replacing the lifter cover and to spray paint the block. Question: Will I have to readjust the timing now? Ignition is EST with 4 wires going into distributor and a clamp to hold...
  4. R

    Does Gimbal Turn while in neutral

    Does the gimbal bearing turn w Does the gimbal bearing turn while in neutral? I have a rough noise while idling and was wondering if that was the gimbal. Previous owner said it needed to be changed. On a scale of 1 to 10. How hard is it to change the bearing (Alpha Gen II)? I have...
  5. R

    Leak from plate on head starboard

    I have a leak from a plate tha I have a leak from a plate that runs the length of the head on the starboard 'drivers' side. 1. Is this plate to cover the exhaust ports and redirect them or something? 2. Is there water or oil on the other side? 3. Anyone know where I can find another...
  6. R

    Find engine model year by serial #

    The engine in my boat is not o The engine in my boat is not original. The stern drive is an 0F... # but how do I find exactly what year the block is? Its a 3.0L.
  7. R

    30L starter rebuild kit

    First question: Anyone know o First question: Anyone know of starter rebuild kits for the 3.0L? Second: I am shredding the sun gear in the starter(plastic one). I have engine run-on problems. Is the gear shredding because it is hydrolocked by extra fuel dumping in or something?
  8. R

    Starter backet on a 30L

    My starter cracked through abo My starter cracked through about 5 mm behind the outside bolt. It still works thanks to zip ties holding it in place (it was swiveling towards the engine and not getting contact). Any guess as to why this happened? Is there suppose to be a bracket that supports...
  9. R

    Excellent parts store for 30L

    "www.ebasicpower.com[/ "[url=""]www.ebasicpower.com I found some really hard to find parts here at good prices. They also ship a full catalog with pictures of all the parts when you buy sumn. Anyways, thought I would mention it. And plus, they are located in NC. So if ur on the east...
  10. R

    30L run on problem

    My engine trys to run on somet My engine trys to run on sometimes after the key is cut off. What needs to be adjusted to stop this? Higher grade fuel?
  11. R

    Vbelt questions

    "Well, this one slipped by me "Well, this one slipped by me until now. The guy before me had 2 belts on my 3.0L. One connecting the PS pump to the water pump, and the second connecting the alternator to the water pump....notice how the crank isn't in that equation anywhere? 1st question is...
  12. R

    30L remove eng mount for belt replacement

    My alternator belt has been ju My alternator belt has been jumping off due to some 'teeth' that are missing. Question is: Can I remove the two 5/8" bolts and spacer for the engine mount on the passenger side of the engine without supporting the engine? Will it stay in place without...
  13. R

    30L timing cover

    Where can I find a timing cove Where can I find a timing cover for a 3.0L GM engine? I have literally looked for hours and all google and ebay show is timing cover gasket sets and front seals. I would rather not have to get it at a dealer since there isn't one anywhere close to here.
  14. R

    Starter shimming problems

    "I got a new starter for my 3. "I got a new starter for my 3.0L (its the type with the one long/one short bolts) and shimmed it with regular washers. I messed around with it a few times and go it to a point where it sounded good and solid. Today I was out on the lake and it was a no go...
  15. R

    Boat infested with ants

    My boat is infested with ants. My boat is infested with ants. I've been sprayn but they keep coming. They are probably in the wooden areas. Anyone know of a way to get rid of them? Its driving me insane. I might put the cover on and fog them.
See more
Back
Top