Current visitors

Home
Members

Quicksilver's latest activity

Quicksilver replied to the thread 1985 Mercury 50HP 2-Stroke - What Tach to buy?.

Check my answer on iboats.

Feb 5, 2024
Quicksilver replied to the thread Lower Unit Seals.

Just in case you haven't seen a 1961 500 here's a scan from my catalog.
Jan 31, 2024
Quicksilver replied to the thread Water Pump Issue/Impeller Melting.

This is how I install the LU in about 60 sec.: Turn the LU shift shaft by hand counter-clockwise until it stops, then with Vise Grips...

Jan 31, 2024
Quicksilver replied to the thread Lower Unit Seals.

4 cylinder Mercs are great motors, they'll do anything.

Jan 31, 2024
Quicksilver replied to the thread Lower Unit Seals.

Here's a guy that can help you with your problem http://www.johnsmcintoshvintagemercuryoutboard.com/LowerUnitTools.html

Jan 30, 2024
Quicksilver replied to the thread Lower Unit Seals.

Maybe someone at John''s Old Mercs can help.

Jan 30, 2024
Quicksilver replied to the thread Lower Unit Seals.

I was afraid of that; maybe a Mercury dealer has that tool and will pull it for you.

Jan 30, 2024
Quicksilver replied to the thread Lower Unit Seals.

Make sure all the grease is drained and the screws are out. The lower seal is the most important it seals the LU. Also you should use...

Jan 30, 2024
Quicksilver replied to the thread Lower Unit Seals.

Check for a screw marked FLUSH on the starboard side of the LU just under a spray plate, and if there's one unscrew it to loosen the...
Jan 30, 2024
Quicksilver replied to the thread 1967 Mercury 500 50hp No Spark.

When you put it together make sure that the rotor shaft is centered in the hole in the red cover, I used a drill that fit and put it...

Jan 28, 2024

Show older items

Home
Members

Top