Logo
FULL SITE MENU

Recent content by ohpoppy

  1. O

    silly but can't determine valve seals for 1994 Penta sl 5.0

    Would like to know a quality brand and part # that can be bought at local auto parts such as advance. Would like seals to be viton, teflon or other quality design. would prefer a set of 16. The motor is a 94 302 ford with a roller block using standard non-roller lifters/cam which is factory.
  2. O

    Penta SX belllow for u-joints question

    I removed it a month ago.. thought there was a expanding metal ring clamp on the propellor side of the old bellow. The volvo brand kit did not include one. Is there supposed to be one or is it plenty tight without one after the outdrive is installed. should I use silicone between the bellow...
  3. O

    wiring harness OMC replaced with Penta

    my 92 Donzi Sweet 16 had a OMC Cobra 5.0, I am replacing the entire drivetrain with a Penta 5.0. regarding the big plug that attaches to the entire boat, instruments,ignition, etc.. it was plugged into the OMC engine harness. Now that engine harness is replaced with a Penta engine harness. The...
  4. O

    convert OMC to penta SX

    I have a 92 Donzi Sweet 16 that has no engine or drive but the Cobra transom plate is still there. The boat was equipped with a OMC Cobra 5.0 (302 Ford) I also have a 1994 Lawson 19' with Volvo Penta 5.0 and SX drive. I will remove engine/drive and whatever from the Lawson and put it in the...
  5. O

    convert omc cobra to mercruiser 4.2

    does anyone know if I place a complete mercruiser drivetrain into a omc boat if the steering and throttle cables will work (Cobra operate Mercruiser). I might could remove the steering wheel and cable as well as the throttle controls from the donor boat but cable lengths may be a problem.. the...
See more
Back
Top