Logo

Recent content by offutd

  1. O

    Tale of 2 motors

    I’m in Weatherford,TX just west of Ft.Worth. As I search locally what does something like what you’re suggesting typically cost?
  2. O

    Tale of 2 motors

    Ok I’m searching for shops that will bore these. What do you mean by bridged block? And further what do you mean by modify bridge?
  3. O

    Tale of 2 motors

    Ok tore apar the motor that is actually on the boat and here is what the cylinders and crank and intake looks like as well as pistons. In my opinion very clean. So scoring front the back on cylinder walls may a good honing can take care of this? As for the pistons a few if not each one in...
  4. O

    Tale of 2 motors

    #1 - 10-4 yes this motor sat outside with the cowl cover on for 2 years since I've had not sure how it lived the previous 21 years. #2 - 10-4 I'm sure this price varies depending on shop and location, any pointers in this type of work? Certain types shops to go to? Maybe ask local marine...
  5. O

    Tale of 2 motors

    Ok I have a pair of 1993 Tracker Pro Series 60HP TE60TLETD. One is on the boat the other is a "parts" motor at least that's what I was told. Ok here goes. I checked compression on the motor that is on the boat. Top: 105 Mid: 95 and Bottom: 105. Before tearing into it i decide to check the...
  6. O

    Help Identifying Model year

    Im going with its a 1993 same as my parts motor thanks @racerone . I will be starting another thread on my findings today be on the lookout!
  7. O

    Help Identifying Model year

    No model number tag on this motor. Only the freeze plug numbers. And I agree with you it between 92 and 95.
  8. O

    Help Identifying Model year

    I have a Tracker pro series 60 HP motor I suspect it to be a 1993 since that's what I was told by the guy I got it from. But we all know how that song and dance goes. Anyways the freeze plunger number is G3279343. I've read where this can be traced to a model year. I have a parts motor with...
Back
Top