I have taken the lower assembly apart as it had water in the oil, and am replacing the seals and going a general clean up. When trying to assemble the power head to the pump section, I can not seem to convince the pump section to set fully down on the power head. I don't want to be assault...
i took some photo's of my 69 Chrysler 105 HP engine with the cover off, then i removed the old fuel and vacuum hoses. Went to the local NAPA and secured 5 feet of each 1/4 vacuum, 5/16 fuel and 3/8 fuel along with new clamps for all. Today I was outside and i dropped my phone from my shirt...
I am in the process of going though the carbs on my 105 HP, I have found a set of main jets that were dropped in the case when someone did a carburetor job long before I bought this a month ago. In the WB carbs on the engine i have found a pair of .088 main jets, the old ones I found in the...
I understand this is a forum for engines, but I don't know where to go for help except here. Suggestions would be appreciated.
I have purchased what I think are most of the parts I need to get my 69 Chrysler 105 HP motor up and running (I'll do the carbs last as I hope to fix the other issues...
I have found the number plate under the hood of my motor. This is not as helpful as I had hoped. The numbers I have found seem not to be leading to a proper Id of my engine and exactly what parts I need to do a repair.
The plate shows: Model #10573 then Serial # 2418 Am I correct in thinking...
I have just purchased a Chrysler 16 foot with a 105 Chrysler engine. The engine was partly disassembled by the previous owner and it is missing the thermostat cover. Does anyone know where I can find an early model thermostat cover for this engine?, the model number is 10573 and the serial...