Logo
FULL SITE MENU

jgmo's latest activity

  • J
    jgmo replied to the thread Alarm.
    Well, a five year old stat might be getting sticky.... ...or it might not. But, this is around the time I would be recommending a new...
  • J
    jgmo replied to the thread Alarm.
    Hi, What year is your engine? I'm not familiar with the tiller models but I own a BF20D remote model and I have both the owners manual...
  • J
    jgmo replied to the thread 2024 BF 50 -external hose.
    I see the link about the fresh water flush port but I couldn't open it. Anyway, thanks for the update and explanation.
  • J
    jgmo replied to the thread 2024 BF 50 -external hose.
    I surely don't know. Something new from Honda? Any possibility that you could upload a photo?
  • J
    jgmo replied to the thread 200 hp stalling.
    After reading up a bit in the service manual under "operation" and looking at the wiring diagram, I see where there is a connection...
  • J
    jgmo replied to the thread honda BF50 tell tale.
    Well, while Ian is right (usually is)....it's just an "indicator" that basically let's you know, at a glance, the pump is moving water...
  • J
    jgmo replied to the thread Honda 9.9 Overheating Continued from April 7.
    The bolts don't need grease but smear the grease inside the liner where the vanes will wipe and put a little on each vane arm end for...
  • J
    jgmo replied to the thread Honda 9.9 Overheating Continued from April 7.
    You are correct, those two tabs on the metal liner stick up vertically and engage the plastic cover. I don't know how the one would...
  • J
    jgmo replied to the thread HONDA 9.9 FITS!.
    Here's some comments about the accelerator pump and the "small metal bearing" that the OP saw fall out. I've written about this...
  • J
    jgmo replied to the thread HONDA 9.9 FITS!.
    Very good news! Nice going getting it done. But.... Now you know that you have to be vigilant about the quality of your fuel. Check...
  • J
    jgmo replied to the thread HONDA 9.9 FITS!.
    Before you put it back together, test the accelerator pump delivery nozzle output. It's VERY important to the way this carburetor...
  • J
    jgmo replied to the thread HONDA 9.9 FITS!.
    Hi, Sorry you're having problems. Finding little to no voltage to the bystarter while cranking is normal. The bystarter is in...
  • J
    jgmo replied to the thread Honda 225 Outboard Ignition Issues - Won't Start.
    As usual, excellent advice from chawk_man. The jumper cable bypass trick is a good one. This may be premature and possibly not your cup...
  • J
    jgmo replied to the thread Honda BF250 Oil Change Questions.
    See if this looks right.... Items #.11 and 12...
  • J
    jgmo replied to the thread Honda 225 Outboard Ignition Issues - Won't Start.
    Good point! High resistance due to a bad connection creates heat. That's why a thermal camera can be a big help finding trouble spots.
Show older items
Back
Top