Logo
FULL SITE MENU

Recent content by essikr

  1. E

    1984 351ci CCW engine starter

    Can anyone help me with finding the starter OEM number ? I need to replace the starboard engine starter. Installed new battery and replaced the solenoid . Checked all electrical connection are clean and tight. The engine turns over very slow and sometimes to slow to start. I guess the number is...
  2. E

    PCM 351 overheating

    My 351 PCM starboard engine overheated. Zebra mussels (lake Erie) plugged the oil cooler water inlet causing a water pump impeller failure . I replaced the impeller and cleaned out the damaged impeller piece's. Took the boat out on the lake at cruising speed temp climbed to 180,had to stay under...
  3. E

    spark plug recommedation

    Can any one recommend what plugs to use in 1984 351 engines . Engines have more then 800 hours. I have been using stock plugs ,would like to try better plugs . The engines don't start as well when they are hot. Do lots of fishing with the boat Cruisers Inc 29 ft Avanto Vee.
  4. E

    Failed exhaust hose

    My Crusiers with twin 351 engines had a exhaust hose fail on the starboard engine .The interior of the hose had collapsed I heard the hose pop and shut the engine down . The water temp was normal when it happened. Putted back to marina on the port engine. Prior to replacing the hose I checked...
  5. E

    velvet drive transmission

    Can I pull the velvet drive transmission 72c while boat is in the water? Twin 351 PCM engines 84 Cruisers Inc Avanti Vee. I believe I have a bad drive plate. The engine is running on all eight ,the clunking sound goes away above 1100 rpm's. Where can I find a new drive plate to fit the engine...
See more
Back
Top