Logo
FULL SITE MENU

Recent content by DeltaRanger

  1. D

    2016 200 ProXS wiring adapter for ‘94 Ranger

    Ok Guys, I finally pulled the trigger on an upgrade. I have a 2016 200 ProXS that I’m rigging. The current ignition switch wiring is a 7 or 8 pin plug on a 1994 Mercury 200EFI. The boat is 1994 Ranger 392XT. What adapter will I need to plug into the new motor? TIA!
  2. D

    Repair transom Assembly ... weld time

    Ok, a guy broke the transom Assembly where one of the rams attaches. Says he don’t know how that happened. Pretty sure he backed it into the dock. No matter, I’m going to attempt a repair. I’m pretty good with the TIG welder, was just wondering best filler rod choice. I have ER4043 and ER5356 on...
  3. D

    1994 200HP Intermittent issues.... dammed gremlins

    1994 2.5L XRi 200HP. Serial number OG103590. At times running at WOT, drop in power, intermittent. Sometimes when trying to get on plane, drop hammer and it just boggs. Put it in neutral , rev it up a couple times and it “clear up”. ive got spark, ran a compression test, all cylinders between...
  4. D

    Power trim

    2006 225hp Mercury Optimax. The power trim works fine on the trailer and at idle. When running WOT, the motor trims up, but, seems to me I should be able to trim up more then it's current position. It used to trim up until prop would cavitate and start to loose water pressure. What would be the...
  5. D

    Stator mount repair

    Hello All, Well, I seem to have run at WOT, and, something broke and engine shut down. Got it back to the garage and the stator tested as bad. After removing the flywheel, discovered that the stator bolts somehow came lose, and, well you can guess the result. Anyways, to my main question. I need...
  6. D

    Mercury 1994 200XRI down on hole shot and top end down 500rpm

    This 1994 200 HP XRI is on a Ranger Bass boat. The last couple years I have the boat out usually 3 days a week, so it doesn't just sit for any extended period. Usually I have a great hole shot and run about 6000 RPM at WOT. She runs about 62+- MPH. A few weeks ago, with no notice, hole shot has...
See more
Back
Top