Logo
FULL SITE MENU

Recent content by Cncquinn

  1. C

    Welding prop

    The other week I spun the hub on my prop. Told a bud at work, and told it won't be taking the boat out til I get a new prop. He told me to just weld the brass bushing to the prop. I told him no, there's got to be a reason why I shouldn't. Give me reasons why I should not weld it. Like ruining...
  2. C

    Seahorse 18 points gap and fuel oil ratio

    Hi new member. i have a seahorse 18 fd-14 that I'm replacing parts on. I was wondering what the gap on the points are suppose to be and what the fuel/ oil ratio is. The gas can that came with it say 50:1 on it. Just want to make sure that is correct
  3. C

    Fd-14 fuel ratio

    I'm sure this has been asked hundreds of time. Just don't feel like searching. I have a seahorse 18 model fd-14 that I'm rebuilding. Just need to know the fuel ratio. He tank I got with the motor has 50:1 marked on it. Is this correct?
  4. C

    1960 seahorse 18 flywheel question

    Is there anything else besides that nut on top holding my flywheel on? I don't want to start hammering or using a gear puller until I know there's nothing else holding it
  5. C

    Greasing water pump impeller

    Earlier i replaced the water pump impeller. When I started it it pumped water then over heated. After going threw all the engine and replacing things as needed, I fired it up and still was getting hot. I took the water pump off and the impeller was melted. I'm getting a new one, and I don't want...
  6. C

    Starter for Johnson.

    Hi. I have a Johnson seahorse fd-14 1960, I was wondering if there could be a way I can add a starter to it, if so where can I find one.
  7. C

    1968 9hp running high

    Just finished rebuilding a 9 horse and she's running high when I start it in low speed, how do I adjust this
  8. C

    Johnson trolling motor

    I have a Johnson bow mount trolling motor that I got with a boat. The motor works great, the problem is I don't know the age, the thrust, or what to ask for it, I want to sell it but thinking they are rare I don't think it will sell for much. What should I ask for it?
  9. C

    9hp ted Williams 1961 no spark

    Hi, new member here, I got a 61 ted Williams, had a hard time finding parts. Even contacted sears and they had no clue what a ted Williams outboard is. I eventually found a place in Michigan who has parts for old outboards made for him. ( www.discount-marine-parts.com) got a carb kit and an...
See more
Back
Top