Logo

Recent content by chackett

  1. C

    Mercury SmartCraft Gauges / Harness / Junction Box

    Hey All- I recently came into a 2003 Mercury Optimax. Seems clean, good condition, running great. It came with some SmartCraft gauges, a tachometer and a spedometer. However I think I am missing a harness or something that's needed to get them connected. The motors were previously running...
  2. C

    1987 DT200 Piston Rings

    Has anyone replaced the piston rings on a 1980's model Suzuki DT200 / DT150 ? I have a 1987 DT200 that has lost all compression on 2 cylinders. All others are 105 PSI on the money. I am assuming it's the piston rings. I was able to get the heads off, but it looks like getting at the...
  3. C

    Powerhead Experience with old model DT200?

    Hi All- I've got a 1986 (I believe) Suzuki DT200- The motor has been absolutely fantastic for so many years, but I think she's on her last leg. I've brought her back from the brink of death several times and I'm hoping to pull off one last miracle. Here's the situation: On our last trip...
  4. C

    DT Oil Pump / Lines bleed procedure

    Hi All- Has anyone ever bled the oil injection system on a Suzuki DT200 (I believe DT150 is the same)? I have the manual and I am able to locate the oil pump and the bleed screw. I have two main questions.. First .. how in the world are you supposed to have access to the bleeder screw while...
  5. C

    DT200 Tachometer doesn't match rpm?

    I trailered my boat about 300 miles this past week. When I arrived and put the boat in something was clearly wrong. It started fine and the port water alarm was sounding (both the red light on the gauge and the audible alarm every 20 seconds or so). Eventually that cleared up but when I...
  6. C

    DT200 rev limiter

    I have a 1989 or possibly a 1988 Suzuki DT200. It has been a great motor for many years and today I had a strange problem. Two problems maybe. I don't know if they are related. First the starboard side water temp light came on and the alarm was also sounding periodically. The port side was...
  7. C

    Video - 1986 DT200 - How does it sound to you?

    Hey Phil, I'm not sure that it won't go any higher than that, I just didn't give it much more throttle than that .. it just "felt" or "sounded" to me like that was about as top end as I should safely get. I've read lots of people saying things like "Oh, you're under propped" or "You need a...
  8. C

    Video - 1986 DT200 - How does it sound to you?

    Howdy, I have a 1986 DT200 that I've been tinkering with for about the last 2 months or so. The boat and motor sat neglected for many years before I picked it up and starting trying to bring it back to life. I did all the usual stuff I could think of (and I'm a total novice, so I'm not sure...
Back
Top