Logo

Recent content by Breakpads

  1. B

    Poor mesh of Bendix gear with flywheel

    The Bendix / selenoid could be weak also.
  2. B

    Poor mesh of Bendix gear with flywheel

    One thing to check out is to see if the bendix spring is driving the starter gear all the way up, if it is week it will not go high enough on the flywheel. A lot of times the spring will lose its ability to send the gear up enough also lube the drive shaft of that gear
  3. B

    Poor mesh of Bendix gear with flywheel

    You could have the wrong starter, and the gear might be the wrong size. has it been changed? Aftermarket? It should be much closer and higher in the flywheel. From your pic. It appears to be too low hence the flywheel has wear on just the bottom half of it.
  4. B

    513031 Evinrude V6 Timing Wheel Encoder

    Can someone verify what line the house goes to the pressure switch for low fuel pressure?/oil? I think it goes on the fuel line from the gas tank that has the fuel filter but, I want to make sure the original VRO. Was abandoned and I am returning it back to factory.
  5. B

    513031 Evinrude V6 Timing Wheel Encoder

    I had the power head just rebuilt and the rebuilder when finished said the engine had a problem with the fuel pump it had low pressure and the veto pump was converted to a pump only, they have a crazy price to restore it so I took it from him and ordered a factory VRO pump and realized it won't...
  6. B

    513031 Evinrude V6 Timing Wheel Encoder

    I'd there a thread someone can steer me to in the procedure on the timing of this engine?
  7. B

    513031 Evinrude V6 Timing Wheel Encoder

    I bought the boat used and it appeared to me that the link from the linkage to the timing advance had been screwd with and it does not look correct to me so I just wanted to check it.
  8. B

    513031 Evinrude V6 Timing Wheel Encoder

    Hey, you might be just the person I am looking for, I have been talking to people at the marina I was at to try and find out how to check my timing on my 1990 200 Johnson. No one could help me they keep telling me it is a big job. I see timing marks on the flywheel and when I put a timing light...
Back
Top