I have a lower unit from a 1971 650 engine that is 20 inch. i need a 15 inch shaft for my lower unit. Can I take the 20 inch shaft out and replace it with a 15 inch shaft/
thnks
I need a wiring diagram for the foot pedal. Mine had two wires the wore through caused a short and melted a bunch of other wires so it's hard to trace where things go. I tested the motor and it's fine so I am hoping rewiring the pedal will save it.
Thanks everyone
It is a model 50ESL74M and I have no spark to the plugs. If I remove the coil wires from the power back and check the terminals with a test light with the engine spinning I get a light. If I reconnect the wores forn the coil I get no Light. If I remove the ground wires form the coils I can...
I have a Mariner control I believe to be a 1971 model. The only numbers I can find on it are on the back plate (65641)
I need an ignition switch with a push to choke. My ignition switch only has 5 terminals on the back and all the ones I am finding have 6 terminals. Will a 6 terminal work in...