Logo
FULL SITE MENU

Recent content by Blacktimes

  1. B

    Honda Dr H Diagnostics

    You need the Dr. H hardware for this. I bought mine at BRP Diagnostics.
  2. B

    Honda Dr H Diagnostics

    https://www.dropbox.com/scl/fi/xiuwsisblkhejq3sn2uv4/Dr.-H.rar?rlkey=9138vcm14x83qvrere3bvjqs0&dl=0
  3. B

    BF225 HO2 Sensor Failure Error

    I always carry two on my boat in my spares box. I have twins, sometimes they last 6 months and sometimes they last a year.
  4. B

    BF225 HO2 Sensor Failure Error

    IF you have the new type (13 or 14mm spanner) the latest P/N is 06356-ZY3-307. Is selling for 60 USD at boat s.net
  5. B

    BF225 HO2 Sensor Failure Error

    Aftermarket ones don't work. I tried two and fortunately got a refund. If you have the new type, there is a new P/N that was around 50USD and they work fine.
  6. B

    BF200A Beeping with 2 second interval and Check Engine Light on (Steady)???

    My engines are 2011. Sorry, missed your engine manufacturing date and they do not have the function.
  7. B

    BF200A Beeping with 2 second interval and Check Engine Light on (Steady)???

    I purchased two NMEA cables for my Garmin Echomap 92SV Plus and twin BF200´s. Only issue was the instance number change on one of the engines as both had the same instance number. Did that with Dr. H. God knows why they don´t use different instance numbers for counter-rotating engines. Connected...
  8. B

    Problem with corrusion on the flyweel BF 225 2002

    Could it be water leaking from the thermostat housings and spraying with the distribution belt?
  9. B

    2004 BF 150 no pee

    Put a flexible fibre line in the pee hole, sometimes it can be sand clogging right at the end, sometimes...
  10. B

    Removing tilt/trim assembly

    I have replaced both tilt trim motors on my BF200´s without removing the bracket and with the boat in the water. See https://www.marineengine.com/boat-forum/threads/bf200-tilt-motor-problem.469169/
  11. B

    BF200 black gearcase oil question

    Changed the oil in both gearcases today on my BF200´s. Starboard oil was brand new and clear, I was really surprised, port oil was black, black, black. No abnormal findings on either chip detector. Have been searching the internet and the consensus is not to worry about black gearcase oil. Last...
  12. B

    Exhaust Manifold O2 Sensor Thread Repair BF200

    With so many O2 Sensor replacements and bad practice, I ended up damaging the Thread on my Starboard BF200AK2. This has the new Sensor (small thread) and the manifold is aluminium so don´t do like I did, and respect the torque because I broke it very easily. Internal anodes are not too bad...
  13. B

    200/400 hr service on BF200

    Took the Port Exhaust Manifold off to repair the O2 Sensor thread, and here is a two photos of the condition of the internal anodes, before & after cleaning. Have replaced these but won´t bother with the other manifold and engine for the moment as they are in a relatively good condition...
  14. B

    200/400 hr service on BF200

    Thanks iang6766. I have the feeling this may vary plenty depending on engine operation on god knows what other factors. I had taken note on 800 hrs based on many posts on various forums. A step by step guide and results can be seen here with 511 hours Internal anode location - Honda BF200 -...
  15. B

    200/400 hr service on BF200

    Done a 200/400 hr service on my twin BF200´s. Engines only have 240 hours on them but they were manufactured in 2011 but were not used until the boat was launched in 2013. Bought it in 2018 with only 35 hours on them. Thinking more about the calendar than the hours, so went ahead and did it...
See more
Back
Top