Logo
FULL SITE MENU

Recent content by bkillian

  1. B

    1999 99 Lower Unit QuestionPics

    "On the right of the first pic "On the right of the first pics there are 2 holes the top 1 is sealed the 2nd is not, my motor is leaking gear oil from the bottom hole, is this hole supposed to be pluged or sealed or is this just excess oil? Also while I'm at it, in the 2nd pic what is the plug...
  2. B

    Opinions On High Thrust 99HP

    "I have the opportunity to buy "I have the opportunity to buy a 2000 9.9HP High Thrust 20' shaft for $650 less than a hour of use. My question is my 12' jon only has a 15' transom, any problems beside the depth of water I will be able to run in? I have heard theses are powerful motors. Also...
  3. B

    Water Discharge

    "I have a 2000 9.9HP 4 Stroke, "I have a 2000 9.9HP 4 Stroke, where should the water discharge come out through the middle of the prop or on the left higher up on the engine? I put a pair of water hose muffs on there and couldn't find where the water was coming out. Any help?"
  4. B

    1979 6hp

    "I just got a 1979 6hp Evinrud "I just got a 1979 6hp Evinrude model# 6904E. The question I have is that it can be locked in the down position, but it doesn't have a way to lock it in the up position, for transport, am I missing something or is that the way it was built? Any suggestions on a...
  5. B

    Inside Cover Material

    "I got this yesterday(&#39 "I got this yesterday('69 9.5hp), after running a minute I noticed the foam material on the inside of the cover falling down on the motor(carb.)I took it out, do I need to replace it? Also, these are the only plugs I found with JC4 on them, but they are too long, I...
  6. B

    Photos of a 1969 Evinrude 95HP

    "My father-in-law is offering "My father-in-law is offering my a 1969 Evinrude 9.5 HP Model# 9922S outboard free, if I will pay the shipping. Any one have any pictures of this particular motor? I'm hoping it will make my 12ft. aluminum jon boat scoot."
See more
Back
Top