Logo
FULL SITE MENU

Recent content by aquafennatic

  1. A

    TAMD71B - Exhaust leak between the Turbo and Exhaust Elbow at the V-Clamp

    I have a TAMD71B and after cleaning the Exhaust elbow I replaced both the flange that connects to the turbo as well as the V-clamp that holds the Exhaust elbow to the flange. The mating surfaces are clean however I have an exhaust leak at the connection between the Exhaust Elbow and the Flange...
  2. A

    TAMD71B - Can Brass fitting with Oil Sensor be removed?

    I've just picked up a used boat with TAMD71B's. As I was changing the oil I noticed that an Oil Sensor was leaking oil on the starboard side of my port engine. I removed the sensor and noticed that the brass fitting that the sensor was screwed into was damaged. As I tried to remove this...
  3. A

    Where can I find 350Q Thermostats

    I currently have a Delco therm I currently have a Delco thermostat that says 143 on the bottom installed in my 350Q engine that needs to be replaced. Can I simply replace it with the 142 degree Crusadar thermostat? Are these thermostats readily available from parts suppliers? Can I use an...
See more
Back
Top