Logo
FULL SITE MENU

Recent content by 300hb

  1. 300hb

    need parts chrysler hm

    Click on the third icon from the right above 'insert image' and then click on 'basic uploader'. You can attach a photo from your computer or phone folder...
  2. 300hb

    A flywheel issue

    Just to wet the appetite for all you Chrysler marine aficionados out there (you know who u r) Chrysler designed and built their own stern drive called the '300' but alas it was only in production for 3 or 4 yrs before the end... .... and here's the man who designed it...
  3. 300hb

    Chrysler distributor key

    So would I line up the rotor to cylinder 1 by moving the cam gear then attach the wires accordingly...??? It's electronic BTW...
  4. 300hb

    Chrysler distributor key

    Hello All, I'm having the shaft on a Mallory distributor machined and wanted to know if the key at the bottom needs to be cut in relation to the direction the rotor is pointing on a VR type ignition...??? Jack
  5. 300hb

    440 LH-RH cams 4 sale

    http://www.ebay.com/itm/Big-Block-Chrysler-B-Bullet-Camshaft-LH-RH-350-440-PN-303000-/111740250120?hash=item1a043ce808:g:S60AAOSw~gRVylml&vxp=mtr
  6. 300hb

    LM318 thrust spacer

    FYI... http://www.ebay.com/itm/Distributor-Thrust-Spacer-Chrysler-LM-318-Reverse-Rotation-Marine-LM318-/291539049652?hash=item43e114dcb4&vxp=mtr
  7. 300hb

    Revisit Chrysler 318 timing suggestions

    I just stumbled on this spec sheet... Would never have thought the 318 and 360 would have different BTC spec...???
  8. 300hb

    Lets see your Chrysler powered boat

    ..... soon upgrading to a 340 Jack
  9. 300hb

    Prestolite Dist upgrade

    http://www.ebay.com/itm/Electronic-Ignition-Conversion-Kit-8-Cyl-Chrysler-Marine-Prestolite-Distributor-/320818086811?pt=Boat_Parts_Accessories_Gear&vxp=mtr&hash=item4ab23f839b Since I hear talk of points and timing issues ever so often this might be a low cost upgrade worth considering Jack
  10. 300hb

    Idle speed

    Anybody out there running 340's....??? I'm trying to decide on a cam that will idle low enough in one. Jack
  11. 300hb

    Magnum marine

    "Here's a guy who's st "Here's a guy who's starting to sell marineized Magnums....I don't think I would hesitate to replace an LA with one of these. Only issue I could see is the water pump is probably reverse rotation due to the original serpentine belt design....Any thoughts....??? Jack...
  12. 300hb

    Chrysler Quadrajet

    "Does anyone use a Rochester o "Does anyone use a Rochester on their small block ? Jack BTW...here's a good price on AFB's... http://marinecarburetor.com/Y43.htm"
  13. 300hb

    What difference there is with left motor mount when going LM318 LM360

    Scott...Were did you find a 36 Scott...Were did you find a 360 marine Mag?
  14. 300hb

    Bell housing seals

    Has any had to replace the sea Has any had to replace the seals in a chrysler I/O bell housing. There is a seal inside behind the bearing with no number on it...Thanks in advance
  15. 300hb

    Best steering

    Hello...Does anyone have any e Hello...Does anyone have any experience using both rotary or rack steering and have a preference? I'm wondering if the rotary has a 'gear reduction' effect making it easier to use at speed and have a quicker response...Thanks
See more
Back
Top