volf, what you are describing is more or less normal. The sneezing is caused by running too lean. It is too lean because it is not warmed up yet and
I replaced my fuel pump with another one off of a similar 350 Crusader. Here's how it unfolded,
- Removed all the fittings from the old pump, noticed
If that is a 20 inch transom then you need a long shaft or cut the transom down. How big is the boat did you try just shifting weight back it dont look
My vote is for ventilation of the prop. How high is the transom where the motor clamps on? If it was the hub it would slip full time when you motor up.
Hi, i have a mercury controls on my boat and it has a straight plug on the end of it. i dont have any motor so i was going to buy another merk but i dont