Boat Repair Forum

Hi All, I'm new to the forum. I'm sure this topic has been covered many times, but I'm totally stumped by my problem. I have a 1989 Johnson 60hp...

I am looking for the tool to remove these bushings.

I have a 95 Johnson I can't get the miss out. I sprayed mixed fuel inside one carb and it raised up like gas is missing. what can that tell me?

I have a 1989 225 HP Johnson. I have noticed that lately it really does not want to start. You can grind all you want, and it will not even cough. ...

Hi All Just joined after a referral from another site :) Have a question I wonder if you can help me with. I am in the process refurbing my...

just brought this motor comes with remote box what other electric gauges etc will i need?

My buddy has a 95 ranger with a 115 Johnson. We hook it up to the ear muffs and it idles good and everything, rev's good But after five minute he...

I just received an old Evinrude Junior Cleaned it up and it runs. How do I set the carborator? The carb part number is:397260 Where can I find an...

Hello all, Greetings from Finland. I just bought a small ht-boat with 70hp Evinrude and have few questions about it. I didn´t got any owner´s manual...

What kind of motor performance should be expected if the break points are set too close? For my 1970 Johnson it needs to be set at 0.010. I...

can I switch carbs from a 1979 115hp evinrude to a 1975 85hp johnson, and will it give me more power?? and do you know how many years are changable....

Purchased boat and had a tough time starting and at low idle. Mid range on up it ran like a top. Mechanic said this particular motor has a Sure...

Hi all, While waiting for some bits and decals to arrive for one of my CD-15s,I decided to do a quick freshen up of a Canadian Lightwin 3034/51106....

I have two lower units for my '63 Big Twin 40. One may have originally come off a Johnson but appears to be about the same year based on the parts...

I have an Evinrude 2HP 4416 "1947" and would like to know if the carburetor from a 4412 "1946" motor is the same or will fit the motor? The existing...

i have an 85hp johnson and when i take it out it runs great for about 100 or 200yrds then misses out then takes off again then misses out. it...

Hi guys Can I run pre-mixed gas and oil through the fram ps3808 filter/water separator to my 85hp 2-stroke evinrude? I cannot find anywhere what...

i have a 1988 evinrude 1.2 junior that is new to me, in fact its my first outboard engine,i have already flushed the tank,disassembled the carb just...

i just got a bass tracker with what looks like a salt water 40hp johnson but dont know the yr and the tag is missing i found a number on the welch...

I have been struggling with this motor for the past 2 years trying to get it to run right with no success. It starts OK but runs poorly at low...

i have a johnson 15 hp 4 stroke that lost all power and stalled but did restart but now has an oil leak that looks like it is coming out the air...

Anybody know what size socket is required to remove the Flywheel nut on a '83 70hp Evinrude? I need to change the Stator. The boat is in TN and I'm...

115 hp evinrude 1979, I have boat listed on craigslist so far no takers. I was thinking about rebuilding it myself. can someone tell me what the...

I have a johnson 15 hp that kinda runs rough and the upper plugs doesnt burn good I have not did a compresion test on it but I supect it needs a ring...

I am now the owner of a 1973 85 hp johnson V-4 outboard, It has been many years since i have owned an outboard motor. Can anyone help refresh my...

Hi, I am new to outboard motor repair,but mechanically inclined I have a johnson service manual but they are short on details, doing a long to short...

hi all can someone tell me why the t stats have threaded ends on them,do they screw into something,thanx

hey all, just picked up 68 mfg with 40hp super seahorse, eng is a 65. had her running, 1st trial out, she would only run with with eng hood off, but...

I have a 1979 Johnson Javelin 100 hp that has been converted to a jet drive. Due to the wear in the jet and the poor performance in ice, I am in the...

I have a 150 johnson that will run fine for 15 min then check enine light comes on with steady alarm temp is at 165 and if you run at about 4000 she...

After fixing most of my fuel problems I ran my engine in the driveway for about 10 min. It ran great until all the sudden it just stopped. Almost...

How/can I set the timing (max spark advance) on an evinrude 115tlend, 1992?

I have a 4.3 liter mercrusier and busted the coupler. I had it replaced and it busted again. Im not sure why this is happing but something must not...

I have a Lark Evinrude 40 hp 35520 I need to replace the flywheel nut and key. Is there a lock washer? I think the part #'s are 305984 nut / 300345...

Does anyone have any suggestions for removing the engine to replace the steering cable? I am not sure were to place the lifting slings? Thanks in...