Logo
FULL SITE MENU

TAMD 60C

N

neilium

New member
" Hello,
I'm looki

" Hello,
I'm looking for specs and tune up information on a Tamd 60c I don't even know what year model it is. Nothin forthcoming on the volvo penta website, they don't even list this model, (why why?).
Im after torque range, rev limit. and basic tune up not major overhaul just yet lols. I better not laugh at that eh?
I'd have to sell a few kidneys. "
 
" tamd60c flywheel hp 250,ma

" tamd60c flywheel hp 250,max rpm 2800,fuel pump psi 14-21,turbo psi 24.6,exhaust pressure 1.4. valve setting intake 0.40mm{0.016} exhaust 0.45mm {0.018}.fireing order 1 5 3 6 2 4 .corresponding cylinder on which valves will rock 6 2 4 1 5 3.sorry i dont know the torque range. hope this helps. "
 
" I am looking for information

" I am looking for information, preferably a shop manual, for a Volvo TAMD 60B which is also a 250 hp turbocharged diesel circa 1983 0r 1984. Any help appreciated. "
 
" Dave,Can supply copy of 60B

" Dave,Can supply copy of 60B workshop that we had printed if interested. DV "
 
"I'm looking for the weigh

"I'm looking for the weight and dimensions of a volvo TAMD60C. If anyone has that, it would be appreciated. I'm considering repowering away from volvo to possibly yanmar. Any thoughts or suggestions? Thanks!"
 
"Hello,
I am interests in acq

"Hello,
I am interests in acquiring an Albin 48 North Sea Cutter. This boat is powered by twin TAMD 60C engines, in the specifications the listing states that these power units have 2200 hours on them. Is this a lot? Even under ideal maintenance conditions would they still be reliable. I would appreciate comments from anyone with more knowledge than me."
 
Back
Top