Logo

Cobra transom shift cable help

ajs_22

New member
"I recently broke my transom s

"I recently broke my transom shift cable I beleive. The boat is new to me, 1987 though, and it always has been hard shifting. The boat was on the water this weekend and it was not going into reverse so I tried puting it in foward gear and there was nothing there. I can freely move the cable at the motor and there is no drag at all as if broken and the shift cable from the throttle is working as should.

I have read all the "hasting" info but I am wondering what all needs to be done to change the cable. Does the entire out drive need to be taken off? Any help would be awsome!

Thanks
AJ"
 
"Outdrive has to come off to d

"Outdrive has to come off to do it, you should get yourself a manual to supplement the info on Stuarts website."
 
Back
Top