J
JerryJohnson
Guest
"#3 cyl is flooding and #2 IS
"#3 cyl is flooding and #2 IS flooding but about half as much, #1 is burning good. Compression 128 acroos the board. New needle seats and needle valves installed completely cleaned along with psi inlet valve tested held 15psi. float drop correct, reed valves mint condition. I question the solenoid choke gaskets but why would #2 be effected since its not part of the enrichment system. I will be blocking off the enrichment system to check if it clears #3 cylinder. I really don't want to open engine to check if there is any crank seals going out the machine has less than 300 hours on it. is there another way to check the crank seals without opening the engine. any thoughts about crank seals would greatel be appreciated. Jerry"
"#3 cyl is flooding and #2 IS flooding but about half as much, #1 is burning good. Compression 128 acroos the board. New needle seats and needle valves installed completely cleaned along with psi inlet valve tested held 15psi. float drop correct, reed valves mint condition. I question the solenoid choke gaskets but why would #2 be effected since its not part of the enrichment system. I will be blocking off the enrichment system to check if it clears #3 cylinder. I really don't want to open engine to check if there is any crank seals going out the machine has less than 300 hours on it. is there another way to check the crank seals without opening the engine. any thoughts about crank seals would greatel be appreciated. Jerry"
